دکتر علیرضا مهدویان

صفحه اصلی > منوهای بالای سایت > اعضای هیات علمی  > دکتر علیرضا مهدویان 
آخرین اخبار
تفاهم نامه
1403/11/17
اطلاعیه جشن دهه فجر
1403/11/16
مقاله
1403/11/14
IPJ
1403/11/10

CURRICULUM VITAE


 

Ali Reza Mahdavian
(PhD, MSc, BSc)
Professor



 
Personal Information

Name: Ali Reza
Surname: Mahdavian
Place of Birth: Tehran, Iran
Status: Married and have a son
Nationality: Iranian
Languages: Persian, English

Address

Polymer Science Department
Faculty of Polymer Science
Iran Polymer & Petrochemical Institute
P.O. Box 14965/115
Tehran, 14967
Iran
Tel.: +9821 4478 7000
Fax: +9821 4478 7023
a.mahdavian@ippi.ac.ir
amahdavian2002@yahoo.com
www.ippi.ac.ir

 
Educations

1. Ph.D. in polymer chemistry from Isfahan University of Technology, January 2000
Thesis: Synthesis of optically active and photo- active polymers via cycloaddition polymerization reactions
2. M.Sc. in polymer chemistry from University of Tehran, September 1995
Thesis: Preparation of core- shell polymeric particles by emulsion polymerization technique
3. B.Sc. in chemistry from University of Shiraz, September 1993
Thesis: Preparation of poly (vinyl pyridine) supported ferric dichromate in oxidation of different organic compounds

 
Positions

1. Professor at IPPI, POLYMER SCIENCE DEPARTMENT since 2012.
2. Associate professor at IPPI, POLYMER SCIENCE DEPARTMENT, 2006-2012.
3. Assistant professor at IPPI, POLYMER SCIENCE DEPARTMENT, 2000- 2006.
4. Head of PUBLICATION OFFICE at IPPI since 2010.
5. Sabbatical leave at EMULSION POLYMER INSTITUTE (EPI) in Lehigh University, Bethlehem, PA, USA, 2009- 2010.
6. Director of RESEARCH & POSTGRADUATE DEPARTMENT at IPPI, 2006- 2009.
7. Head of CENTRAL LABORATORIES at IPPI, 2004- 2006.

 
Research Interests

My research interests are majorly on preparation, characterization and optimization of emulsion and miniemulsion-based products and also nanocomposite particles with core-shell morphology, including potential applications in coatings and biomedical systems. Some typical headlines are:
1. Polymer colloids and particles with emphasise on emulsiond and miniemulsion polymerization and specifically in preparation of core-shell and nanocomposite particles
2. Kinetic and thermodynamic studies of radical polymerization in the dispersed media
3. Polymer synthesis and characterization
4. Surface modification of polymers

 
Teaching Experience

Ph.D. Courses:
1. Advanced Chemistry & Kinetics of Polymerization
2. Polymer Modification Techniques

M.Sc. Courses:
1. Chemistry & Kinetics of Polymerization I
2. Chemistry & Kinetics of Polymerization II

Others:
1. Polymer Principles (B.Sc. Course)
2. Characterization of Polymers (Short Course)
3. Polymer Chemistry Lab (B.Sc. Course)
4. Organic Chemistry (B.Sc. Course)

Journal Papers

  1. A. Abdollahi, J. Keyvan Rad, A. R. Mahdavian*; "Stimuli-responsive cellulose modified by epoxy-functionalized polymer nanoparticles with photochromic and solvatochromic properties", Carbohydr. Polym., 2016, DOI: 10.1016/j.carbpol.2016.05.009.
  2. J. Keyvan Rad, A. R. Mahdavian*; "Preparation of fast photoresponsive cellulose and kinetic study of photoisomerization", J. Phys. Chem. C, Vol. 120, 2016, 9985-9991.
  3. J. Keyvan Rad, A. R. Mahdavian*, H. Salehi-Mobarakeh, A. Abdollahi; "FRET phenomenon in photoreversible dual-color fluorescent polymeric nanoparticles based on azocarbazole/spiropyran derivatives", Macromolecules, Vol. 49, 2016, 141-152.
  4. I. Hasanzadeh, A. R. Mahdavian*, M. Barikani; "Preparation of acrylic/MWNTs nanocomposite latexes via ultarsonically-assisted emulsion polymerization: A comparative study", Eur. Polym. J., Vol. 75, 2016, 104-115.
  5. I. Hasanzadeh, M. Barikani*, A. R. Mahdavian; "Ultarsound-assisted emulsion polymerization of poly (methyl methacrylate-co-butyl acrylate): Effect of initiator content and temterature", Polym. Eng. Sci., Vol. 56, 2016, 214-221.
  6. S. Torabi, A. R. Mahdavian*, M. Sanei, A. Abdollahi; "Chitosan and functionalized acrylic nanoparticles as the precursor of new generation of bio-based antibacterial films", Mater. Sci. Eng. C, Vol. 59, 2016, 1-9.
  7. A. Abdollahi, A. R. Mahdavian*, H. Salehi Mobarakeh; "Preparation of stimuli-responsive functionalized latex nanoparticles: The effect of spiropyran concentartion in size and photochromic properties", Langmuir, Vol. 31, 2015, 10672-10682.
  8. M. Maleki Rahim-Abadi, A. R. Mahdavian*, A. Gharieh, H. Salehi Mobarakeh; "Chemical modification of TiO2 nanoparticles as an effective way for encapsulation in polyacrylic shell via emulsion polymerization", Prog. Org. Coat., Vol. 88, 2015, 310-315.
  9. M. Khalina, M. Sanei, H. Salehi Mobarakeh, A. R. Mahdavian*; “Preparation of acrylic/silica nanocomposite latexes with potential application in pressure sensitive adhesive”, Int. J. Adhesion Adhesives, Vol. 58, 2015, 21-27.
  10. A. Rezaee Shirin-Abadi, S. Khoee, M. Maleki Rahim-Abadi, A. R. Mahdavian*; “Kinetic and thermodynamic correlation for prediction of morphology of nanocapsules with hydrophobioc core via miniemulsion polymerization”, Colloids and Surfaces A: Physiochem. Eng. Aspects, Vol. 462, 2014, 18-26.
  11. I. Hasanzadeh, A. R. Mahdavian*, H. Salehi Mobarakeh; “Particle size and shell composition as effective parameters on MFFT for acrylic core-shell particles prepared via seeded emulsion polymerization”, Prog. Org. Coat., Vol. 77, 2014, 1874-1882.
  12. F. Shokrolahi*, A. R. Mahdavian, P. Shokrolahi; “Cure kinetic of epoxy-novolac resin containing tetrabromo-bisphenol-A as a flame retardant by isothermal calorimetry method”, Iran. J. Polym. Sci. Technol. (In Persian), Vol. 26, 2014, 537-547.
  13. F. Khakzad, Z. Alinejad, A. Rezaee Shirin-Abadi, M. Ghasemi, A. R. Mahdavian*; “Optimization of parameters in preparation of PCM microcapsules based on melamine-formaldehyde through dispersion polymerization”, Colloid Polym. Sci., Vol. 292, 2014, 355-368.
  14. Y. Mosleh, N. Golshan Ebrahimi*, A. R. Mahdavian, M. Ashjari; “TPU/PCL/nanomagnetic ternaty shape memory composites: studies on their thermal, dynamic- mechanical, rheological and electrical properties”, Iran. Polym. J., Vol. 23, 2014, 137-145.
  15. A. Gharieh, A. R. Mahdavian*, H. Salehi-Mobarakeh; “Preparation of core-shell impact modifier particles for PVC with nanometric shell thickness through seeded emulsion polymerization”, Iran. Polym. J., Vol. 23, 2014, 27-35.
  16. Z. Alinejad, F. Khakzad, A. Rezaee Shirin-Abadi, M. Ghasemi, A. R. Mahdavian*; “Preparation of melamine formaldehyde microcapsules containing hexadecane as a phase change material and investigating the effect of surfactants type and amount”, Iran. J. Polym. Sci. Technol. (In Persian), Vol. 26, 2013, 33-44.
  17. M. Ashjari, S. Khoee, A. R. Mahdavian*; “Controlling the morphology and surface property of magnetic/cisplatin-loaded nanocapsules via W/O/W double emulsion method”, Colloid and Surfaces A: Physiochem. Eng. Aspects, Vol. 408, 2012, 87-96.
  18. Z. Roveimiab, A. R. Mahdavian*, E. Biazar, K. S. Heidari; “Preparation of Magnetic Chitosan Nanocomposite Particles and Their Susceptibility for Cellular Separation Applications”, J. Colloid Sci. Biotechnol., Vol. 1, 2012, 1-7.
  19. Y. Yang, A. R. Mahdavian, E. S. Daniels*, A. Klein, M. S. El-Aasser; “Gold Deposition on Fe3O4/(co)Poly(N-octadecyl methacrylate) Hybrid Particles to Obtain Nanocomposites with Ternary Intrinsic Features”, J. Appl. Polym. Sci., Vol 127, 2013, 3768-3777.
  20. F. Zhao, A. R. Mahdavian, M. B. Teimouri, E. S. Daniels*, A. Klein, M. S. El-Aasser; “RAFT-mediated emulsion polymerization of vinyl acetate: A challenge towards producing high molecular weight poly (vinyl acetate)”, Colloid Polym. Sci., Vol. 290, 2012, 1247-1255.
  21. M. Ashjari, S. Khoee, A. R. Mahdavian*; “A multiple emulsion method for loading 5-fluorouracil into a magnetic-magnetic nanocapsule: a physiochemical investigation”, Polym. Int., Vol. 61, 2012, 850-859.
  22. M. Ashjari, S. Khoee*, A. R. Mahdavian*, R. Rahmatolahzadeh; “Self- assembled nonomicelles using PLGA-PEG amphiphilic block copolymers for insulin delivery: a physiochemical investigation and determination of CMC values”, J. Mater. Sci.: Mater. Med., Vol. 23, 2012, 943-953.
  23. H. Salehi-Mobarakeh*, A. Yadegari, F. Khakzad, A. R. Mahdavian; “Modifying Montmorillonite Clayvia Silane Grafting and Interfacial Polycondensation for Melt Compounding of Nylon-66 Nanocomposite”, J. Appl. Polym. Sci., Vol. 124, 2012, 1501-1510.
  24. E. Tayeb, A. R. Mahdavian, M. Barikani*; “The Effect of Cobalt Naphthenate and 2-benzoylbenzoic acid on UV-Degradation of LDPE”, Iranian J. Chem. Eng., Vol. 8, 2011, 31-42.
  25. A. Rezaee ShirinAbadi, A. R. Mahdavian*, S. Khoee; “New Approach for the Elucidation of PCM Nanocapsules through Miniemulsion Polymerization with an Acrylic Shell”, Macromolecules, Vol. 44, 2011, 7405-7414.
  26. A. R. Mahdavian*, Y. Gholamzadeh, H. Salehi-Mobarakeh; “Preparation of Latexes Based on Amine-Modified Acrylic Nanoparticles via Seeded Emulsion and Miniemulsion Polymerization”, Adv. Polym. Technol., Vol. 30, 2011, 276-285.
  27. M. Mirzataheri, A. R. Mahdavian*, M. Atai; “Kinetic Studies of Preparation of Nanocomposites Based on Encapsulated Cloisite 30B in Poly [Styrene-co-(Butyl acrylate)] via Miniemulsion Polymerization”, Polym. Int., Vol. 60, 2011, 613-619.
  28. M. Mirzataheri, M. Atai*, A. R. Mahdavian; “Physical and Mechanical Properties of Nanocomposite Barrier Film Containing Encapsulated Nanoclay”, J. Appl. Polym. Sci., Vol. 118, 2010, 3284-3291.
  29. M. Ashjari, A. R. Mahdavian*, N. Golshan Ebrahimi, Y. Mosleh; “Efficient Dispersion of Magnetite Nanoparticles in the Polyurethane Matrix Through Solution Mixing and Investigation of the Nanocomposite Properties”, J. Inorg. Organomet. Polym., Vol. 20, 2010, 213-219.
  30. A. R. Mahdavian*, M. Mirrahimi; “Efficient separation of heavy metal cations by anchoring polyacrylic acid on superparamagnetic magnetite nanoparticles through surface modification”, Chem. Eng. J., Vol. 159, 2010, 264-271.
  31. E. Tayeb, M. Barikani*, A. R. Mahdavian, H. Honarkar; “An Investigation into the UV-Photo-Oxidative Degradation of LDPE by Using Cobalt Naphthenate as Photosensitizer”, Polym. Plast. Technol. Eng., Vol. 49, 2010, 718-724.
  32. E. Tayeb, M. Barikani, A. R. Mahdavian*, H. Honarkar; “The Effect of Cobalt Naphthenate & 2-Hydroxy-4-methoxybenzophenone on Photo-oxidative Degradation of LDPE”, Iranian Polym. J., Vol. 18, 2009, 753-760.
  33. A. R. Mahdavian*, Y. Sarrafi, M. Shabankareh; “Nanocomposite particles with core-shell morphology III: preparation & characterization of nano Al2O3-poly (styrene-methyl methacrylate) partcles via miniemulsion polymerization”, Polym. Bull., Vol. 63, 2009, 329-340.
  34. S. Khoee*, A. R. Mahdavian, W. Biaramy, M. Ashjari; “An Investigation into the improvement of adhesive strength of polyimides by incorporation of elastomeric nanoparticles”, J. Colloid Interface Sci., Vol. 336, 2009, 872-878.
  35. M. Mirzataheri, A. R. Mahdavian*, M. Atai; “Nanocomposite particles with core-shell morphology IV: an efficient approach to the encapsulation of Cloisite 30B by poly(styrene-co-butyl acrylate) and preparation of its nanocomposite latex via miniemulsion polymerization”, Colloid Polym. Sci., Vol. 287, 2009, 725-732.
  36. M. Nabid*, M. Golbabaee, A. R. Mahdavian, “Preparation of the α- Al2O3/ PANI nanocomposite via Enzymatic Polymerization”, Polym. Compos., Vol. 30, 2009, 841-846.
  37. A. R. Mahdavian*, Y. Sehri, H. Salehi- Mobarakeh; “Nanocomposite Particles with Core- Shell Morphology. I. An Investigation into the Affecting Parameters on Preparation of Fe3O4- Poly (butyl acrylate- styrene) Particles via Miniemulsion Polymerization”, Eur. Polym. J., Vol. 44, 2008, 2482- 2488.
  38. A. R. Mahdavian*, M. Ashjari, H. Salehi- Mobarakeh; “Nanocomposite Particles with Core- Shell Morphology. I. Preparation and Characterization of Fe3O4- Poly (butyl acrylate- styrene) Particles via Miniemulsion Polymerization”, J. Appl. Polym. Sci., Vol. 110, 2008, 1242- 1249.
  39. A. R. Mahdavian*, M. Ashjari, A. Bayat Makoo; “Preparation of Poly (Styrene- methylmethacrylate)/ SiO2 Composite Nanoparticles via Emulsion Polymerization. An Investigation into the Compatiblization.”, Eur. Polym. J., Vol. 43, 2007, 336- 344. (Among the Top 25 Hottest Articles of this journal during Oct. 2007- Oct. 2008).
  40. M. Abdollahi, A. R. Mahdavian*, A. Nouri; “Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H- NMR Spectroscopy”, J. Macromol. Sci. Part A: Pure Appl. Chem., Vol. 44, 2007, 839- 848.
  41. A. R. Mahdavian*, M. Abdollahi; “Kinetic Study of Radical Polymerization VII. Investigation into the Solution Copolymerization of Acrylonitrile and Itaconic Acid by Real- Time 1H- NMR Spectroscopy”, J. Appl. Polym. Sci., Vol. 103, 2007, 3253- 3260.
  42. S. Shaghaghi, A. R. Mahdavian*; “Flame- retardancy Improvement of Novel Styrene- maleic anhydride Based Copolymers”, J. Polym. Res., Vol. 13, 2006, 413- 419.
  43. A. R. Mahdavian*, M. Zandi, S. Khoee; “Kinetic Study of Radical Polymerization IV. Solid- melt State Copolymerization of Acrylamide and Sodium methacrylate by DSC”, Designed Monomers and Polymers, Vol. 9, 2006, 439- 451.
  44. A. R. Mahdavian*, M. Abdollahi; “The Comparison between Initial Charge, Shot and Modified Shot Process and Their Effects on Macrostructure of Particles in Emulsion Copolymerization of Styrene- butadiene- acrylic acid”, React. Func. Polym., Vol. 66, 2006, 247- 254.
  45. S. Shaghaghi, A. R. Mahdavian*; “The Effect of Sodium Dodecyl Benzene Sulfonate on Particle Size in Suspension Polymerization of Styrene: A New Investigation”, Polym. Plast. Technol. Eng., Vol. 45, 2006, 109- 115.
  46. M. Abdollahi, A. R. Mahdavian*, H. R. Bijanzadeh; “Kinetic Study of Radical Polymerization IV. Copolymer Composition and Kinetic Parameters for Copolymerization of Styrene- Itaconic Acid by On- Line 1H- NMR”, J. Macromol. Sci. Part A: Pure Appl. Chem., Vol. 43, 2006, 1597- 1608.
  47. A. R. Mahdavian*, M. Abdollahi, L. Mokhtabad, F. Ziaee; “Kinetic Study of Radical Polymerization V. Determination of Reactivity Ratio in Copolymerization of Acrylonitrile and Itaconic Acid 1H- NMR”, J. Macromol. Sci. Part A: Pure Appl. Chem., Vol. 43, 2006, 1583- 1596.
  48. A. R. Mahdavian*, M. Abdollahi, L. Mokhtabad, H. R. Bijanzadeh, F. Ziaee; “Kinetic Study of Radical Polymerization IV. Determination of Reactivity Ratio in Copolymerization of Styrene and Itaconic Acid by 1H- NMR”, J. Appl. Polym. Sci., Vol. 101, 2006, 2062- 2069.
  49. A. R. Mahdavian*; “Nanoemulsion and Nanocomposite Preparation by Emulsion Polymerization”, Iranian Rubber Technology, (In Persian), Vol. 10 (38), 2005, 105- 107.
  50. A. R. Mahdavian*, M. Abdollahi, H. R. Bijanzadeh; “Kinetic Study of Radical Polymerization III. Solution Polymerization of Acrylamide by 1H- NMR”, J. Appl. Polym. Sci., Vol. 93, 2004, 2007- 2013.
  51. A. R. Mahdavian*, J. Morshedian, M. Rezaie; “The Comparison Between Synergistic Effect of Sb2O3 and Al(OH)3 on the Flame- Retardancy of HIPS in the Presence of Tetrabromobisphenol- A”, Iran. Polym. J., Vol. 13, No. 3, 2004, 219-224.
  52. A. R. Mahdavian*, M. Abdollahi; “Investigation into the Effect of Carboxylic acid Monomer on Particle Nucleation and Growth in Emulsifier- Free Emulsion Copolymerization of Styrene- Butadiene- Acrylic acid”, Polymer, Vol. 45, 2004, 3233- 3239.
  53. A. R. Mahdavian*, I. Sarvi; “The 12 Principles of Green Chemistry”, Chemistry Journal, (In Persian), Vol. 17 (1), 2004, 23- 26.
  54. A. R. Mahdavian*, M. Zandi; “Kinetic Study of Radical Polymerization II. Solid State Bulk Polymerization of Sodium methacrylate by DSC”, J. Appl. Polym. Sci., Vol. 90, 2003, 1648- 1654.
  55. A. R. Mahdavian*, M. Zandi; “Thermal and Kinetic Study of Radical- Initiated Bulk Polymerization of Acrylamide I.”, J. Appl. Polym. Sci., Vol. 87, 2003, 2335- 2340.
  56. A. R. Mahdavian*, S. Khoee; “A Facile and New Method in Preparation of Chiral Poly (Styrene- Divinylbenzene) Copolymers”, React. & Funct. Polym., Vol. 50, 2002, 217-223.
  57. A. R. Mahdavian*, N. Sharifi-Sanjani; “Role of Emulsifiers in Preparation of Core- Shell Particles via Step- wise Emulsion Polymerization”, Iran. Polym. J., Vol. 10, 2001, 243-249.
  58. S. E. Mallakpour*, A. R. Hajipour, A. R. Mahdavian, A. Zadhoush, F. Ali- Hosseini; “Microwave Assisted Oxidation of Polyethylene Under Solid-State with Potassium Permanganate”, Eur. Polym. J., Vol. 37, 2001, 1199-1206.
  59. S. E. Mallakpour*, A. R. Hajipour, A. Zadhoush, A. R. Mahdavian; “Efficient and Novel Method for Surface Oxidation of Polypropylene in the Solid-Phase Using Microwave Irradiation”, J. Appl. Polym. Sci., Vol. 79, 2001, 1317-1323.  
  60. N. Sharifi- Sanjani, A. R. Mahdavian, P. Bataille*; “Emulsion Polymerization of Styrene and DEAEMA with Core- Shell Structure”, J. Appl. Polym. Sci., Vol. 78, 2000, 1977-1985.
  61. S. E. Mallakpour*, A. R. Hajipour, A. R. Mahdavian; “Synthesis of Novel Photoactive Heterocyclic Polyimides Containing Naphthalene Moieties via Cycloaddition Reactions”, J. Appl. Polym. Sci., Vol. 78, 2000, 527-536.
  62. S. E. Mallakpour*, A. R. Hajipour, A. R. Mahdavian, S. Khoee; “Synthesis and Characterization of Novel Optically Active and Flame- Retardant Heterocyclic Polyimides”, J. Appl. Polym. Sci., Vol. 76, 2000, 240-248.
  63. S. E. Mallakpour*, A. R. Hajipour, A. R. Mahdavian, S. Khoee; “Asymmetric Polymerization via Cycloaddition Reactions”, J. Polym. Sci., Part A: Polym. Chem., Vol. 37, 1999, 1211-1219.
  64. S. E. Mallakpour*, A. R. Hajipour, A. R. Mahdavian, F. Rafiemanzelat; “Highly Diastereoselective Synthesis of Novel Polymers via Tandem Diels- Alder- ene Reactions”, Polym. Int., Vol. 48, 1999, 109-116.
  65. S. E. Mallakpour*, A. R. Mahdavian, B. Sheikholeslami; “Synthesis of Aliphatic Polyamides Containing 4- (4- Benzophenone) Urazol Linkages”, Iran. J. Polym. Sci. Tech. (In Persian), Vol. 11, No. 3, 1998, 163-168.
  66. B. Tamami*, H. Firouzabadi, M. M. Lakouraj, A. R. Mahdavian; “Poly (Vinyl pyridine) Supported Versus Unsupported Ferric Dichromate in Oxidation of Different Organic Compounds”, Iran. Polym. J., Vol. 3, No. 2, 1994, 82-87.
 Conference Papers
More than 100 abstracts have been presented in national and international conferences. Some selected presentations are listed below:
  1. A. Abdollahi, H. Salehi-Mobarakeh, A. R. Mahdavian, “Synthesis of a spiropyran-based acrylic monomer and preparation of its latex nanoparticles with photochromic properties”. 11th International Seminar on Polymer Science and Technology (ISPST 2014), Tehran, Iran, October 2014.
  2. M. Sanei, S. Torabi, H. Salehi-Mobarakeh, A. R. Mahdavian, “Preparation of anti-scratch transparent films based on silica/acrylic nanocomposite particles”. 11th International Seminar on Polymer Science and Technology (ISPST 2014), Tehran, Iran, October 2014.
  3. S. Torabi, M. Sanei, A. Abdollahi, A. R. Mahdavian, “Reactive Mixing of Chitosan and Functionalized Acrylic Nanoparticles for Preparation of a New Generation of Antibacterial Films”. 11th International Seminar on Polymer Science and Technology (ISPST 2014), Tehran, Iran, October 2014.
  4. A. Mahdieh, A. R. Mahdavian, H. Salehi-Mobarakeh, “Surface modification of Fe3O4 with acrylic groups and preparation of  magnetic nanocomposite particles via miniemulsion polymerization”. 11th International Seminar on Polymer Science and Technology (ISPST 2014), Tehran, Iran, October 2014.
  5. A. Rezaee Shirin-Abadi, Z. Alinezhad, F. Khakzad, M. Ghasemi, A. R. Mahdavian, “Preparation of microcapsules containing HD as a phase change material: an investigation into Core to shell ratio and surfactant amount”. 10th International Seminar on Polymer Science and Technology (ISPST 2012), Tehran, Iran, October 2012. (Selected as the distinguished paper)
  6. A. Gharieh, A. R. Mahdavian, “Synthesis of PBr- acrylic core-shell particles as impact modifier through seeded emulsion polymerization”. 10th International Seminar on Polymer Science and Technology (ISPST 2012), Tehran, Iran, October 2012.
  7. Z. Alinezhad, A. Rezaee Shirin-Abadi, F. Khakzad, M. Ghasemi, A. R. Mahdavian, “Improvement of microencapsulated PCMs charachteristic by variation of effective curing parameters”. 14th National Congress of Chemical Engineering, Tehran, Iran, October 2012.
  8. M. Maleki Rahimabadi, A.R. Mahdavian, H.Salehi-Mobarakeh, S. Pazokifard, “Modification of water-base acrylic resin using surface treated TiO2 to improve thermal properties of the films”. 4th International Congress on Nanoscience and Technology (ICNN 2012), Kashan, Iran, September 2012.
  9. A. Rezaee Shirin-Abadi, Abadi, S. Khoee, A. R. Mahdavian, “Investigation of thermodynamic equilibriums and thermal characteristics for elucidation of morphology in liquid core capsules from miniemulsion polymerization”. Polymers in Dispersed Media (PDM 2012), Lyon, France, April 2012.
  10. Z. Roveimiab, E. Biazar, A. R. Mahdavian, “Preparation of magnetic chitosan nanocomposite particles for celluar separation applications”. The 4th International Conference on Nanostructures (ICNS4), Kish Island, Iran, March 2012.
  11. Z. Alinezhad, F. Khakzad-Esfahlan, A. Rezaee Shirin-Abadi, A. R. Mahdavian, “Microencapsulation of n-Hexadecane as a Phase Change Material via In-situ Dispersion Polymerization: Effect of pH and Addition Rate of MF”. 7th International Congress of Chemical Engineering, Kish Island, Iran, November 2011.
  12. M. Ashjari, S. Khoee, A. R. Mahdavian, Z. Bin Chik, “Preparation of Insulin- Loaded PLGA Nanospheres by W/O/W Emulsion Solvent Evaporation Technique”. The 5th Iranian Controlled Release Conference (ICRC 2011), Mashad, Iran, September 2011.
  13. M. Ashjari, S. Khoee, A. R. Mahdavian, “Multiple emulsion for 5-Fluorouracil loaded magnetite/PLGA nancapsules”. The 5th Iranian Controlled Release Conference (ICRC 2011), Mashad, Iran, September 2011. (Selected as the distinguished paper)
  14. A. R. Mahdavian, M. Ashjari, S. Khoee, AFM analysis for physiochemical properties of cisplatin loaded magnetite/PLGA nanocapsules. IUPAC, 9th International Conference on Advanced Polymers via Macromolecular Engineering, Cappadocia, Turkey, September 2011.
  15. A. Rezaee, A. R. Mahdavian, S. Khoee, “Optimization of latent heat and determination of shell thickness in acrylic- based nanocapsules of phase change materials via miniemulsion polymerization”. IUPAC, 9th International Conference on Advanced Polymers via Macromolecular Engineering, Cappadocia, Turkey, September 2011.
  16. M. Ashjari, S. Khoee, A. R. Mahdavian, “Preparation of magnetic drug-loaded PLGA nanospheres as biodegradable magneto-responsive drug carriers”. 3rd International Congress on Nanoscience & Nanotechnology, Shiraz, Iran, November 2010.
  17. I. Hasanzadeh, A. R. Mahdavian, A. Mirmohammadi, “Preparation of epoxy-modified carbon nano tube composites based on reaction in dispersion stage”. 6th International Congress of Chemical Engineering, Kish Island, Iran, November 2009.
  18. A. R. Mahdavian, I. Hassanzadeh, “Preparation of latexes with bimodal distribution in particle size and molecular weight”. 9th International Seminar on Polymer Science and Technology (ISPST 2009), Tehran, Iran, October 2009.
  19. D. Zare-Hossein-Abadi, A. R. Mahdavian, M. B. Teimouri, M. Ashjari, “Synthesis of poly (styrene-co-butyl acrylate) with low polydispersity index via RAFT mediated miniemulsion polymerization”. 9th International Seminar on Polymer Science and Technology (ISPST 2009), Tehran, Iran, October 2009.
  20. A. R. Mahdavian, M. A. Mirrahimi, V. Mohammadi, “Preparation of Magnetic Nanoparticles and their Surface Modification with APTES”. 2nd International Congress on Nanoscience & Nanotechnology, Tabriz, Iran, October 2008.
  21. A. R. Mahdavian, Y. Sehri, H. Salehi- Mobarakeh; “Invesigation of the Effect of Parameters on Preparation of Nanocomposite Particles with Core- Shell Morphology Based on Fe3O4- Poly (Butylacrylate- Styrene) Particles by Miniemulsion Polymerization”. Polymer Colloids: From Design to Biomedical and Industrial Applications (48th Microsymposium), Prague, Czech Republic, July 2008.
  22. A. R. Mahdavian, “Investigation of Parameters Affecting the Preparation of Core- Shell Polymeric Particles via Seeded Emulsion Polymerization”. Surfactant and Detergent Technology Conference, Tehran, Iran, January 2008.
  23. M. Ashjari, A. R. Mahdavian, H. Salehi- Mobarakeh, “Encapsulation of Magnetite Nanoparticles by Styrene- Butyl acrylate Copolymer through Chemical Initiator- Free Miniemulsion Polymerization”. 8th International Seminar on Polymer Science and Technology (ISPST 2007), Tehran, Iran, October 2007.
  24. A. R. Mahdavian, Y. Sehri, H. Salehi- Mobarakeh; “Preparation of Styrene- Butylacrylate Nanocomposite Particles with High Magnetic Content by Miniemulsion Polymerization”. International Conference on Advancement of Materials and Nanotechnology, Langkawi, Malaysia, May- June 2007.
  25. A. R. Mahdavian, A. Ashjari, Y. Sehri; “Preparation of Core- shell Nanocomposite Particles: Encapsulation of Inorganic Nanoparticles by Organic Copolymers via Emulsion Polymerization Technique”. 1st International Congress on Nanoscience and Nanotechnology, Tehran, Iran, December 2006.
  26. A. Ashjari, A. R. Mahdavian, A. Bayat Makoo; “Preparation of Nanocomposite Particles of Silica/ poly (styrene- methymethacrylate- acrylic acid) via Seeded Emulsion Polymerization”. 11th National Congress of Chemical Engineering, Tehran, Iran, November 2006.
  27. A. R. Mahdavian, M. Abdollahi, L. Mokhtabad, H. R. Bijanzadeh, F. Ziaee;  “Kinetic Studies of Radical Polymerization of Styrene and Itaconic acid by 1H- NMR Spectroscopy. Determination of Reactivity Ratios”, 13th National Seminar of Organic Chemistry (ISOC), Hamedan, Iran, September 2006.
  28. A. R. Mahdavian, A. Bayat Makoo, A. Ashjari; “Preparation of Poly (Styrene- methymethacrylate)/ SiO2 Nanocomposite Particles via Emulsion Polymerization. An Investigation into the Compatibilization”. International Conference on Nanoscience and Technology, Basel, Switzerland, July 2006.
  29. S. Khoee, S. Zamani, A. R. Mahdavian; “Flexibility Improvement of Epoxy Resins by Carboxylated SBR”. 7th International Seminar on Polymer Science and Technology (ISPST 2005), Tehran, Iran, October 2005.
  30. A. R. Mahdavian, M. Abdollahi, L. Mokhtabad, F. Ziaee; “Determination of Reactivity Ratios in Solution Copolymerization of Acrylonitrile and Itaconic acid”. 7th International Seminar on Polymer Science and Technology (ISPST 2005), Tehran, Iran, October 2005.
  31. A. R. Mahdavian; “The Direction of Petrochemical Downstream Industries”. 1st National Meeting on Polymerization and Improvement of Polymer Properties, Qeshm, Iran, February 2005.
  32. A. R. Mahdavian, M. Abdollahi, F. Abbasi Sourki; “The Comparison between Initial charge, Shot and Modified Shot Processes and their Effects on Macrostructure of Particles in Emulsion Copolymerization of Styrene- butadiene- acrylic acid”. 9th National Congress of Chemical Engineering, Tehran, Iran, November 2004.
  33. A. R. Mahdavian, M. Zandi, I. Sarvi; “Copolymerization Study of Acrylamide and Sodium methacrylate with Peroxide Initiator in Solid- state by DSC”. 9th National Congress of Chemical Engineering, Tehran, Iran, November 2004. (Selected as the distinguished paper)
  34. I. Sarvi, A. R. Mahdavian; “The 12 Principles of Green Chemistry”. 1st National Conference on Methods of Developing Ecology Culture, Tehran, Iran, June 2004.
  35. M. Zandi, A. R. Mahdavian, I. Sarvi; “Dynamic DSC Studies of Post- copolymerization of Acrylamide/ Sodium methacrylate”. 40th International Symposium on Macromolecules (MACRO 2004), Paris, France, July 2004.
  36. M. Abdollahi, A. R. Mahdavian, H. R. Bijanzadeh; “The Effect of Carboxylic acid Monomer on Particle Nucleation in Emulsifier- free Emulsion Copolymerization of Styrene- Butadiene- Acrylic acid”. 8th National Congress of Chemical Engineering, Mashad, Iran, October 2003.
  37. M. Rezaie, J. Morshedian, A. R. Mahdavian; “Effect of Tetrabromobisphnol-A as a Flame Retardant on Properties of High Impact Polystyrene”. 6th International Seminar on Polymer Science and Technology (ISPST 2003), Tehran, Iran, May 2003.
  38. A. R. Mahdavian, M. Abdollahi, H. R. Bijanzadeh; “Application of 1H-NMR Spectroscopy in Study of Solution Polymerization of Acrylamide Using Potassium Persulfate as Initiator”. 6th International Seminar on Polymer Science and Technology (ISPST 2003), Tehran, Iran, May 2003.
  39. A. R. Mahdavian, S. Khoee; “A facile and efficient method in preparation of chiral supported poly (styrene- divinylbenzene) copolymers”. IUPAC Polymer Conference (IUPAC- PC2002), Kyoto, Japan, December 2002.
  40. A. R. Mahdavian, M. Zandi; “Radical polymerization of sodium methacrylate in solid- phase and the study of its thermal behavior”. 7th National Congress of Chemical Engineering, Tehran, Iran, October 2002.
  41. 12. A. R. Mahdavian, P. Bataille, N. Sharifi-Sanjani; “Investigation of parameters affecting the preparation of core- shell polymeric particles via seeded emulsion polymerization”. EMULSION 2002, 3rd World Congress on Emulsions, Lyon, France, September 2002.
  42. A. R. Mahdavian, M. Zandi; “Radical polymerization of acrylamide in the melt- state. Study of thermal and kinetic behavior”. 3rd IUPAC Sponsored International Symposium on FREE RADICAL POLYMERIZATION: KINETICS AND MECHANISM, IL CIOCCO (Lucca), Tuscany, Italy, June 2001.
  43. A. R. Mahdavian, M. Zandi; “Study on kinetic behavior of bulk and radical polymerization of acrylamide”, 6th National Congress of Chemical Engineering, Isfahan, Iran, May 2001.
  44. S. E. Mallakpour, A. R. Hajipour, A. R. Mahdavian; “Synthesis of novel photoactive heterocyclic polyimids containing naphthalene moieties via cycloaddition reactions”, 7th NSOC, Tehran, Iran, August 1999.
  45. S. E. Mallakpour, A. R. Hajipour, A. R. Mahdavian; “An efficient and novel method for surface oxidation of polypropylene under solid phase using microwave irradiation”, 7th NSOC, Tehran, Iran, August 1999.
  46. S. E. Mallakpour, A. R. Hajipour, A. R. Mahdavian; “Microwave assisted oxidation of polyethylene in the solid phase”, 7th National Seminar of Organic Chemistry (NSOC), Tehran, Iran, August 1999.
  47. S. E. Mallakpour, A. R. Hajipour, A. R. Mahdavian, S. Khoee, F. Rafiemanzelat; “Preparation of novel optically active monomers and the study of their 1H-NMR spectra”, 13th NSCE, Tehran, Iran, February 1999.
  48. S. E. Mallakpour, A. R. Hajipour, A. R. Mahdavian, S. Khoee; “High diastereoselectivity in Diels- Alder- ene reactions and mechanistic studies”, 13th NSCE, Tehran, Iran, February 1999.
  49. S. E. Mallakpour, A. R. Hajipour, A. R. Mahdavian, S. Khoee, F. Rafiemanzelat; “Synthesis of novel optically active polymers via Diels- Alder- ene reactions”, 13th National Seminar of Chemistry and Chemical Engineering (NSCE), Tehran, Iran, February 1999.
  50. S. E. Mallakpour, B. Sheikholeslami, A. R. Mahdavian; “Synthesis of aliphatic polyamides containing 4-(4-Benzophenone) Urazol linkages”, International Seminar of Polymer Science and Technology (ISPST 2001), Tehran, Iran, November 1998.
  51. S. E. Mallakpour, A. R. Mahdavian; “Synthesis of new Triazolinedione containing phenoxy long alkyl chain group”, 6th International Seminar of Organic Chemistry (ISOC), Tabriz, Iran, August 1997.
 
 Books
  1. A. R. Mahdavian, M. Abdollahi, M. Ashjari; In: From Emulsion Polymerization to Nanoemulsions (Concepts and Applications); Iran Polymer and Petrochemical Institute Publisher: Tehran; Iran; in 312 pages; 2008 (In Persian).
  2.  S. Taghvaei, M. Taghizadeh, A. R. Mahdavian; In: Handbook of Rubber Chemicals; Rubber Industries Engineering & Research Co. Publisher: Tehran; Iran; in 343 pages; 2008 (In Persian).
  3.  A. R. Mahdavian, S. Khoee; In: Horizons in Polymer Research; Editor: R. K. Bregg; Nova Science Publishers, Inc.: New York; Chapter 3: Trends in Modification of Polymers; pp. 83- 114; 2005.
  4.  A. Elaissari, A. R. Mahdavian; In: Microgel Suspensions; Editors: A. Fernandez-Nieves, H. Wyss, J. Matteson, D. A. Weitz; Wiley-VCH: Weinheim, Germany; Chapter 2: Polymerization Kinetics of Microgel Particles; pp. 33-53; 2011.

 Patents
  1.  Preparation of Stable Carboxylated styrene- butadiene Rubber with High Solid Content. By: A. R. Mahdavian, M. Abdollahi; Iran Patent No. 29622; 3rd May, 2004.
  2.  Preparation of a Tetrabromo bisphenol-A Derivative as a New Reactive Flame Retardant for Polymers. By: S. Shaghaghi, A. R. Mahdavian; Iran Patent No. 43080; 6th Oct., 2007.
  3.  Preparation of Polymeric Nanocomposite Films with Magnetic Properties Based on Poly (Styrene-co- butyl acrylate) via Miniemulsion Polymerization. By: A. R. Mahdavian, M. Ashjari; Iran Patent No. 45513; 15th Jan., 2008.
  4.  Purification, functionalization and separation of carbon nanotubes in lab scale. By: A. R. Mahdavian, I. Hasanzadeh, M. Ashjari; Iran Patent No. 59641; 21st July, 2009.
  5.  Surface modification of carbon nanotubes by acidic oxidation and preparation of corresponding epoxy nanocomposites. By: I. Hasanzadeh, A. R. Mahdavian; Iran Patent No. 59642; 21st July, 2009.
  6.  Preparation of water-base traffic paint with short drying time and improved mechanical properties. By: I. Hasanzadeh, A. R. Mahdavian, Sh. Pazoki-Fard, H. Salehi-Mobarakeh, Y. Gholamzadeh Jeddi; Iran Patent No. 59646; 21st July, 2009.
  7.  Preparation of water-base traffic paint with bimodal size distribution of latex particles. By: I. Hasanzadeh, A. R. Mahdavian; Iran Patent No. 59645; 21st July, 2009.
  8.  Preparation of polymeric films based on copoly (vinyl acetate/ 1-hexene) containing nanoclay. By: H. Salehi Mobarakeh, A. R. Mahdavian, F. Amanizadeh; Iran Patent No. 84347; 23rd Nov. 2014.
 
Awards
    Distinguished paper presented at The 9th National Congress of Chemical Engineering, Tehran, Iran, November 2004.
    Distinguished paper presented at The 2nd National Conference of Traffic Paints, Tehran, Iran, December 2008.
    Distinguished paper presented at The 5th Iranian Controlled Release Conference (ICRC), Mashad, Iran, September 2011.
    Distinguished paper presented at The International Seminar on Polymer Science & Technology (ISPST), Tehran, Iran, October 2012.
M. Sc. and Ph. D. students

Graduated:
  1. Preparation of water-base fluorescing latexes based on acrylic copolymer/carbazole nanoparticles and investigation of their optical properties, 2015 (J. Keyvan Rad: M. Sc. Thesis)
  2. Chemical modification of magnetite nanoparticles and preparation of acrylic copolymer magnetic particles through miniemulsion polymerization, 2015 (A. Mahdieh: M. Sc. Thesis)
  3. Preparation of photochromic water-base coating based on acrylic copolymer nanoparticles containing spiropyran and investigation of photochromic properties of the final coating, 2014 (A. Abdollahi: M. Sc. Thesis)
  4. Preparation of acrylic copolymer/silica nanocomposite particles through miniemulsion polymerization for transparent films with anti-scratch properties, 2014 (M. Sanei: M. Sc. Thesis)
  5. Preparation and comparison of acrylic nanoparticles containing epoxy groups with core-shell and copolymeric structure by emulsion polymerization, 2013 (S. Torabi: M. Sc. Thesis)
  6.  Preparation of modified water-base acrylic copolymer with nano-TiO2 to improve final film properties for application in traffic paints, 2012 (M. Maleki Rahim-Abadi: M. Sc. Thesis).
  7.  Synthesis of poly (methyl methacrylate-co-butyl acrylate) particles with nanometric thickness of the shell through seede emulsion polymerization as impact modifier of PVC, 2012 (A. Gharieh: M.Sc. Thesis).
  8.  Preparation of drug delivery systems based on 5-fluorouracil and cisplatin anticancer pharmaceutics in magnetic PLGA nanocapsules and insulin-loaded PLGA-PEG nanomicelles, 2012 (M. Ashjari: Ph.D. Thesis)
  9.  Studying the compatibilization of polyamide/polyethylene/clay nanocomposite, using modified ethylene-vinyl alcohol as compatiblizer, 2011 (F. Khakzad: M.Sc. Thesis).
  10.  Preparation of chitosan-coated ferric oxide nanoparticles by chemical methods for cellular separation applications, 2011 (Z. Rovei Miab: M.Sc. Thesis).
  11.  The effect of nanoclay on emulsion copolymerization of vinyl acetate and ?-olefines, 2011 (F. Amanizadeh: M. Sc. Thesis).
  12.  Preparation and characterization of nanocapsules containing phase change materials through miniemulsion polymerization and study of their thermal properties, 2011 (A. Rezaee Shirin-Abadi: Ph.D. Thesis).
  13.  Chemical modification of nanoclay and ethylene-vinyl alcohol copolymer for improved compatibilization in HDPE/nylon/nanoclay nanocomposite, 2011 (A. Yadegari: M.Sc. Thesis).
  14.  Preparation of acrylic copolymer/nanosilica nanocomposites with potential application in pressure-sensitive adhesives, 2011 (M. Khalina: M.Sc. Thesis).
  15.  Acrylic-base nanocomposite barrier coatings including nanoclay prepared via miniemulsion polymerization: Preparation, properties and kinetics, 2010 (M. Mirzataheri: Ph.D. Thesis).
  16.  Preparation of water- based resins containing secondary nanoparticles of acrylic copolymer with controlled MFFT, 2009 (I. Hassanzadeh: M.Sc. Thesis).
  17.  Studying the effect of cobalt naphthenate, 2-hydroxy-4-methoxybenzophenone and 2-benzylbezoic acid on the photooxidative degradation of low density polyethylene, 2009 (E. A. Eltayeb: Ph.D. Thesis).
  18.  Preparation of magnetite nanoparticles containing polymerizable functional groups, 2009. (M. A. Mirrahimi: M.Sc. Thesis).
  19.  Preparation of nanocomposite acrylic latexes containing nano-Alumina, 2008. (M. Shabankareh: M.Sc. Thesis).
  20.  Preparation of fast- drying latexes used for waterborne traffic paints containing acrylic copolymer nanoparticles via emulsion and miniemulsion polymerization, 2008. (Y. Gholamzadeh Jeddi: M.Sc. Thesis).
  21.  Synthesis of conducting nanocomposite polymers in the presence of inorganic nanoparticles via enzymatic polymerization, 2008. (M. Golbabaee: M.Sc. Thesis).
  22.  Preparation and characterization of magnetite/ copoly (styrene- butyl acrylate) nanocomposite particles with core- shell structure via miniemulsion polymerization and investigation of their affecting parameters, 2007. (Y. Sehri: M.Sc. Thesis).
  23.  Preparation of magnetite/ poly (styrene- butyl acrylate) nanocomposite particles with core- shell structure via miniemulsion polymerization, 2007. (M. Ashjari: M.Sc. Thesis).
  24.  Preparation of silica/ poly (styrene- methyl methacrylate- acrylic acid) nanocomposite particles with core- shell structure via emulsion polymerization, 2006. (A. Bayat Makoo: M.Sc. Thesis).
  25.  Kinetic studies on radical copolymerization of itaconic and acrylonitril with vinyl monomers by using of 1H-NMR spectroscopy, 2004. (L. Mokhtabad: M.Sc. Thesis).
  26.  Study on core- shell structure of acrylic systems obtained from emulsion copolymerization, 2004. (M. Najafi: M.Sc. Thesis).
  27.  Preparation of carboxylated SBR latexes by emulsion polymerization technique, 2004. (M. Abdollahi: M.Sc. Thesis).
  28.  Modification and preparation of flame- resistant high- impact polystyrene (HIPS), 2003. (M. Rezaei: M.Sc. Thesis).

 Current students:
4 M.Sc. and 4 Ph.D. students are working now on PREPATION, CHARACTERIZATION and OPTIMIZATION of emulsion and miniemulsion-based products and also nanocomposite particles with core-shell morphology with potential applications in coatings and biomedical systems.
 
 Projects
 
  1. Preparation of water-base photochromic coatings and investigation of their optical properties. (Financial support by Center of Excellence for Polymer Processing and Coatings, Ministry of Science, Iran, 2015).
  2. The Effect of gold-coated magnetic nanoparticles on radiosensitivity and thermosensitivity of allograft model of colon cancer cell line CT26 in BALB/c mice. (Financial support by Iran National Science Foundation (INSF), Iran, 2014).
  3. Production of MBS particles as impact modifier for PVC at pilot scale. (Financial support by Technology Deputy, IPPI, Iran, 2014).
  4. Preparation of water-base acrylic traffic paints at bench scale. (Financial support by Technology Deputy, IPPI, Iran, 2013).
  5. Preparation and characterization of MF and UF- based microcapsules containing phase change materials through dispersion polymerization. (Financial support by an industrial partner, Iran, 2012).
  6. Preparation of water- base resins containing acrylic copolymer nanoparticles with controlled MFFT for traffic paints. 
  7. Preparation of thermo sensitive and magnetic smart polymers, loading of their nanoparticles with 5-Fluorouracil and investigation on the effect of loaded nanoparticles on DU145 human prostate carcinoma cell line. (Financial support by Iran National Science Foundation (INSF), Iran, 2008). 
  8. Assessment of production and consumption of water- based pure acrylic and styrene- acrylic resins.
  9. Kinetic studies of radical copolymerization of vinyl acetate -methyl acrylate and determination of their reactivity ratios by 1H-NMR spectroscopy. 
  10. Preparation of nanocomposite latexes by emulsion polymerization. (Financial support by Nanotechnology committee (Presidential office) and Ministry of Sciences, Iran, 2004). 
  11. Kinetic study of new flame- resistant polyesters by DSC analysis. 
  12. Preparation of flame- retarded styrene- maleic anhydride copolymer. 
  13. Extraction, separation and characterization of the pyrolysis products of the Terminalia Brownii wood. (In collaboration with Industrial Research and Consultancy Center in Khartoum, Sudan, 2004). 
  14. Comprehensive study on technological improvement of Iran Petrochemical Industries due to local conditions. (Financial support by Ministry of Industries and Ministry of Sciences, Iran, 2002). 
  15. Kinetic studies of radical polymerization and copolymerization by 1H-NMR spectroscopy. (Financial support by Third World Academy of Sciences (TWAS), Italy, 2002). 
  16. Solid- state radical polymerization of sodium methacrylate and its kinetic studies by DSC.
  17. Preparation and modification of flame- resistant polystyrene and its foam.
  18. Preparation of n- butyl cyanoacrylate as a tissue adhesive. 
  19. Functionalization of polystyrene for separation of optically active chemicals in chromatographic technique.
  
 Others
  • Member of Center of Excellence for Polymer Processing and Coatings, Ministry of Science, Iran.
  • Associate Editor of Iranian Polymer Journal (by Springer), Editor-in-Chief & Executive Manager of "Iranaian Journal of Polymer Science and Technology (in Persian)" and "Polymerization (in Persian)" (by Iran Polymer and Petrochemical Institute) since 2011.
  • Member of Editorial Board of several scientific journals as Iranian Polymer Journal (by Springer), Journal of Colloid Science and Biotechnology (by American Scientific Publishers), Iranian Journal of Polymer Science and Technology (In Persian) (by Iran Polymer and Petrochemical Institute) and Basparesh (In Persian) (by Iran Polymer and Petrochemical Institute).
  • Member of scientific committee of "Surfactant and Detergent Technology Conference", May 23- 24, 2010, Sharif University of Technology, Tehran, Iran.
  • Member of scientific committee of "Surfactant and Detergent Technology Conference", Jan. 23- 24, 2008, Sharif University of Technology, Tehran, Iran.
  • Member of scientific committee of "9th National Rubber Conference", Nov. 18- 19, 2008, Rubber Industries Engineering & Research Co., Kish Island, Iran.
  • Chairman, organizer and lecturer of more than 10 national short- courses and workshops.
  • Regular reviewer of the following ISI cited international journals, typically:
1.  Journal of Polymer Science, Part A: Polymer Chemistry (Wiley)
2.  Applied Materials & Interfaces (ACS)
3.  Journal of Colloid and Interface Science (Elsevier).
4.  Journal of Applied Polymer Science (Wiley)
5.  Polymer International (Society of Chemical Industry (SCI) and Wiley)
6.  European Polymer Journal (Elsevier)
7.  Iranian Polymer Journal (Iran Polymer & Petrochemical Institute)
 8. Journal of Polymer Research (Springer)
 9. Composite Science and Technology (Elsevier)
 10. Colloid and Surfaces A: Physiochemical and Engineering Aspects (Elsevier)
 11. Chemical Engineering Journal (Elsevier)
 12. Colloid and Polymer Science (Springer)
 13. Materials Chemistry and Physics (Elsevier)
 14. Journal of Hazardous Materials (Elsevier)
 15. Polymer Bulletin (Springer)
 16. Journal of Chemical Technology and Biotechnology (Wiley)
 17. Journal of Colloid Science and Biotechnology (American Scientific Publishers)
 18. eXPRESS Polymer Letters (Budapest University of Technology and Economics, Department of Polymer Engineering)


Last update: May, 2016