Professor
 Dr. Morteza Ehsani

 


 

Tel.: +98-21 48662502
E-mails: m.
ehsani@ippi.ac.ir             ehsanimorteza@yahoo.com

 USEFUL LINKS:

 

 

 1. Personal Details

  • Name & Surname:  Morteza Ehsani
  • Date and place of birth:  03/02/1972,  Iran
  • Marital status: Married
  • Nationality: Iranian
  • Language: English (writing, reading, speaking)
 
 
2. Educational Qualification                                                          

  1. B.Sc. (Chemical Engineering), University of Science & Technology of Iran, Tehran (1989-94). Thesis: “Design and Simulation of Fluidized Bed Reactor”.
  2. M.Sc. (Chemical Engineering), University of Science & Technology of Mazandaran, Iran (1994-97). Thesis: “Preparation and Synthesis of Urethane Alkyd Resin for Using in Industrial Coatings”.

3.Ph.D. (Polymer Engineering), Polymer and Petrochemical Institute, Joint project with Leibniz Universität HannoverGermany (1998-2004).  Thesis: “Multi-Component Polymeric Alloys as Outdoor High Voltage Insulators“.

 
 
 
 
3. Teaching Experience                                                                    

  1. Physical Chemistry of Polymers
  2. Polymer Recycling
  3. Polymeric Resins (Epoxy, Polyester, Polyurethanes…)
  4. Surface coatings (Resin & Paint )
  5. Polymer technology
4. Research Interests                                                                         
  1. Nano Technology and Nano Composites
  2. Polymeric Electrical Insulation
  3. Surface coatings  (Resins and Paints)
  4. Powder coatings
  5. Polymeric Alloys
  6. Synthesis of  Resins
  7. Biomaterials
 
5. Employment                                                                                 

  1. Iran Polymer and Petrochemical Institute (IPPI), 2015-Present, Professor of Polymer Engineering
  2. Iran Polymer and Petrochemical Institute (IPPI), 2009-2015, Associate Professor of Polymer Engineering
  3. Iran Polymer and Petrochemical Institute (IPPI), 2004-2009, Assistant Professor of Polymer Engineering
  4. Iran Polymer and Petrochemical Institute (IPPI), 2012-2014, Deputy of Financial and Administration
  5. Iran Polymer and Petrochemical Institute (IPPI), 2010-2012, Chief of Polymer Processing Faculty
  6. Iran Polymer and Petrochemical Institute (IPPI), 2008-2010, Deputy of Financial and Administration
  7. Iran Polymer and Petrochemical Institute (IPPI), 2006-2008, Chief of Polymer technology Incubator
  8. PEKA Chemi, Tehran, 2004-2006, Vice President and Technical Consultant
  9. Schering Institute, University of Hannover, Germany, 2003-2004, Research visitor Collaboration with Professor H. Borsi and Professor E.Gockenbach
  10. Tarbiat Moalem University, Tehran, 2004, Lecturer in “Polymer Chemistry and Technology”
  11. Islamic Azad University of Shahr Rey, Tehran, 1999-2003, Lecturer in “Polymer Chemistry and Technology”
  12. Hawilux Paint & Resin CO. Tehran, 1998-2003, R & D Deputy Managing Director
  13. Hawilux Paint & Resin CO. Tehran, 1998-2003, Powder Coating Manager
  14. Pars Pamchal CO, Tehran, 1994-98, Senior Chemist
  15. South Korea,  1999, Training in Hyundai CO
  16. Milano, Italy,  2002, Training in O.M.C. CO
  17. South Korea, 2003, Training in Hyundai CO.
  

6. HONOURS AND AWARDS

  1. 2108, Selected as the Distinguished Researcher (Academic Staff) of Iran Polymer & Petrochemical Institute.
  2. 2014, Selected as the Distinguished Researcher (Academic Staff) of Iran Polymer & Petrochemical Institute.
  3. 2011, Selected as An Excellent Lecturer of 26th International Power System Conference, (PSC2011), Tehran, Iran.
  4. 2009, Selected as the Distinguished Researcher (Academic Staff) of Iran Polymer & Petrochemical Institute.
 
7. OTHER PROFESSIONAL ACTIVITIES                                        


A) REVIEWS

  1. Advances in Polymer Technology
  2. Journal of European Transactions on Electrical Power, Published by John Wiley.
  3. International Journal of the Physical Sciences (English) Published by Academic Journals
  4. European Polymer Journal (English), Published by Elsevier Science Ltd
  5. Journal of Applied Polymer Science (English), Published by John Wiley.
  6. Polymer Testing
  7. Applied Composite Materials (English), Published by Springer.
  8. AIMS Materials Science
  9. Iranian Polymer Journal (English), Published by Springer.
  10. Iranian Journal of Polymer Science &Technology (Persian), Published by the Iran Polymer Institute
  11. Progress in Color, Colorants and Coatings (English), Published by Science and Color Technology institute.
  12. Journal of Color Science and Technology (Persian), Published by Science and Color Technology institute.
  13. Iran National Science Foundation
  14. 4th International color and coating congress (English), Amir kabir University, Tehran.
  15.  International power system conference, PSC 2005-2014, Tehran, Iran
  16. 9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran
  17. 8th International Seminar on Polymer Science and Technology, ISPST 2005, Tehran, Iran
  18. Polymer Compounds, Composites & Foams, ISPST 2005, Tehran, Iran
 
B) Scientific Society Member and Journal Editorial Board

  1. Journal of Nanostructure in Chemistry
  2. Asian Journal of Nanosciences and Materials.
  3. Non-Metallic Material Science
  4. Progress in Color, Colorants and Coatings (English).
  5. Journal of Color Science and Technology (Persian)
  6. Journal of Basparesh (Persian)
  7. Iran Polymer Society
  8. Iranian National Electro-Technical Committee (INEC)
  9. Iranian Insulators Technical Committee
 
8.Publications                                                                                                                                                       
 

Book

  1. M. Ehsani, A. Ghadami, "Polymers Recycling", (In Persian), ISBN: 978-600-93931-0-7, Iran Polymer and Petrochemical Institute Publisher, 2017.
  2. M. Ehsani, K. Khodabakhshi, "Handbook of Sustainable Polymers: Processing and Applications ", ChapterDevelopments and Applications of Sustainable Polylactic Acid Parts(In English), Publisher: Pan Stanford Publishing, & Copy; Inc., pp.395-448, ISBN:978-981-4613-53-8 (Hardcover), October 28, 2015.
  3. M. Ehsani, J. Morshedian, G.R. Bakhshandeh, “New Polymeric Alloys as High Voltage Insulators”, (In English), ISBN: 978-3-8433-9250-1, Lambert Academic Publisher (Lap), Germany, 2011.
  4. M. Ehsani, J. Morshedian, G.R. Bakhshandeh"Polymeric Electrical Insulators", ISBN: 978-600-90570-3-0, (In Persian), Iran Polymer and Petrochemical Institute Publisher2010.
  5. M. Ehsani, "Translation of Failures and Analyses on Powder Coatings"ISBN: 978-600-90570-2-3, (In Persian), Iran Polymer and Petrochemical Institute Publisher, 2008.
  6. M. Barikani, M. Ehsani, “Chemistry and Technology of Polyurethane”, (In Persian), ISBN : 978-964-2673-00-1, Published by: Ava matn, Tehran, 2008.
  7. M. Ehsani, M. Almassi, “Powder Coatings, Chemistry, and Technology, (In Persian), ISBN: 964-7751-61-3, Talaeih Publisher. 2005.
 
 
Patent
 

 1. German Patent , DE 10 2004 010 278 A1

M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh; “Flexible Outdoor Insulator with Good Electrical, Mechanical and Aging Characteristics”; 2005.

   2. Iranian Patent, NO: 30564

M. Ehsani, J. Morshedian, G.R. Bakhshandeh; "Production of Polymeric Insulation for Use as Transmission & Distribution of Power"; 2005.

3.  Iranian Patent, NO: 42681

M. Ehsani, Y. Jahani, "A New method for Improvement of Rheological Properties of PP-Talc Composites"; 2007.

4. Iranian Patent, NO:42608

M. Ehsani, Y. Jahani, "Recycling of Powder Coatings"; 2007.

5. Iranian Patent, NO:42679

M. Ehsani, Y. Jahani, "A New Additive for Thermal Satiability of PP-Talc Composites"; 2007.

6. Iranian Patent, NO:40364

M. Ehsani, M.Abtahi, GR. Bakhshandeh, "A New Processing Aid for Rubber Compounding"; 2007

7. Iranian Patent, NO: 45650

F. Farhang, M. Ehsani, S. H. Jazayeri, “Production of silicone coatings for using on porcelain insulators”; 2008.

8. Iranian Patent, NO:40365

M. Ehsani, M. Abtahi, G.R. Bakhshandeh, "The Usage of Powder Coating Waste as Filler in Rubber Compounds"; 2008.

9. Iranian Patent, NO:66052

M. Ehsani, M. Haghnegahdar, G.R. Bakhshandeh, G. Naderi, “Preparation of elastomer styrene butadiene/ powder color waste composite”; 2011

10. Iranian Patent, NO:65110

M. Ehsani, M. J. Azizi, G. Naderi, GR. Bakhshandeh, “Production of a blend based on butyl/chloroprene rubber”; 2011

11. Iranian Patent, NO:69413

M. Ehsani, et al. “Preparation of the resin paste dressing plant for periodental surgeries”; 2011.

12. Iranian Patent, NO: 74448

M. Ehsani, Farhadinejad, Z., Mommen-Bellah, S., Alavi, S.M.B. (2012):   Design of a formulation based on nano particles for application in dry transformers,

13. Iranian Patent, NO: 035056

M. Ehsani, E. Aram, Z., H. A. Khonakdar, "preparation of polymeric electrolyte for solar cell application".

 
Journal Papers
 
1.    E. Aram, M. Ehsani, H.A. Khonakdar, "Improvement of Electrical, Thermal and Mechanical Properties of Poly (Methyl Methacrylate)/Poly (Ethylene Oxide) Blend Using Graphene Nanosheets", Journal of Thermoplastic Composite Materials, 1.    Vol 32, Issue 9, 2019.
 
2.    S. Valizadeh, M. Ehsani, M. Torabi Angji, "Prepration, Charactrization and Thermal Properties of PCM Nanocapsules with Polystyrene/Nano Graphen Oxide shell for Energy Storage", Heat and Mass Transfer, Accepted, Aug 2019.
 
3.    A. Yazdani, S-H. Jafari, M. Ehsani, R. Khajavi, HA Khonakdar, " Solid State Viscoelastic Properties, Morphological and Melt Rheological Studies on PLA/TPU/POSS Nanocomposites, Journal Polymer-Plastics Technology and Materials, Volume 58, Issue 10, Pages: 1036-1045, 2019.
 
4.    A. Yazdani, S-H Jafari , M. Ehsani ,  R. Khajavi, HA Khonakdar, "An assessment on effect of trifluoropropyl-POSS and blend composition on morphological, thermal and thermomechanical properties of PLA/TPU", Journal of Thermal Analysis and Calorimetry, DOI: https://doi.org/10.1007/s10973-019-08409-z,   First Online: 04 June 2019.
 
5.    Navid Farhadbeigi, Parvin Ehsani Namin, Ismaeil Ghasemi, Morteza Ehsani, "Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite", Iranian Journal of Polymer Science and Technology (IJPST), Article 3, Volume 32, Issue 1  2019, Page 31-42.
 
6.    Kh. Ghanbari, M. Ehsani, "Change in Surface Properties of Polydimethylsiloxane/Polyurethane/Carbon Nanotubes Elastomeric Coatings", Progress in Organic Coatings, Volume 125, December 2018, Pages 393-402.
 
7.    HJ Rezania, V Vatanpour, A Shockravi, M Ehsani,  "Study of synergetic effect and comparison of novel sulfonated and carboxylated bulky diamine-diol and piperazine in preparation of negative charge NF membrane", Separation and Purification Technology, Volume 222, Pages 284-296, 2019.
 
8.    M. Habibollahi, M. Ehsani, J. Morshedian, "Compatibilization of Polycarbonate/Poly (Ethylene Terephthalate) Blends by Addition their Trans-Esterification Product", Polyolefins Journal, Vol. 6, No. 1,75-83, (2019) .
 
9.    AA. Naziri, H.A. Khonakdar, S. H. Jafari, F. Hemmati, M. Ehsani, "Rheologically Determined Phase Diagram of Poly (ε-caprolactone)/Poly (styrene-co-acrylonitrile) Blends: Role of Ramp Rate in Dynamic Measurements", Journal of Applied Polymer Science, Volume136, Issue28, 47750, July 20, 2019.
 
10.    J. Rezania, A. Shockravi, V. Vatanpour, M. Ehsani, Preparation and performance evaluation of carboxylic acid containing polyamide incorporated microporous ultrafiltration PES membranes, Polymer in Advanced Technology, Volume30, Issue2,  Pages 407-416, February 2019
 
11.    M. Noori, F. Ravari, M. Ehsani, "Thermal Stability and Degradation Kinetic Studies of PVA/ RGO Using The Model-Fitting and Isoconversional (Model-Free) Methods", Fibers and Polymers, 20 (3), 472-480, 2019.
 
12.    M. Noori, F. Ravari, M. Ehsani, "Studying of synthesized nano-adsorbent of graphene and magnetic graphene at removal BTEX of gasoline and investigation of their adsorption isotherms", Journal of Applied Chemistry, Available Online from 16 January 2019
 
13.    S. Valizadeh, M. Ehsani, M. Torabi Angji, "Development and Thermal Performance of Wood-HPDE- PCM Nanocapsule Floor for Passive Cooling in Building", Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Volume 41 Issue 17, Pages: 2114-2127, 2019.
 
14.    Fatemeh Sadat Miri, Morteza Ehsani, Hossein Ali Khonakdar, Omid Dadghari, "Effect of Epoxy Resin on Thermal, Dynamic and Mechanical Properties of Rigid Poly (Vinyl Chloride)", Journal of Vinyl & Additive Technology, Vol. 25, issue. S2, Pages: E72-E79, March 2019.
 
15.     S. Abdollahi, M. Ehsani, J. Morshedian, H. A Khonakdar, Uta Reuter, "Application of Response Surface Methodology in Assessing the Effect of Electrospinning Parameters on the Morphology of Polyethylene Oxide/Polyacrylonitrile Blend Nanofibers Containing Graphene Oxide", Polymer Bulletin, Volume 76, Issue 4, pp 1755–1773, April 2019
 
 
16.    Z. Emami, M. Ehsani , M. Zandi, R. Foudazi ,  "Controlling Alginate Oxidation Conditions for Making Alginate-Gelatin Hydrogels" , Carbohydrate Polymers, Volume 198, 15 October 2018, Pages 509-517.
 
 
17.    Maryam Bayani, Morteza Ehsani, Hossein Ali Khonakdar, Javad Seyfi, Mojtaba Hassani Hosseinabadi‐Ghaeni, "An Investigation of Tio2 Nanoparticles Effect on Morphology, Thermal, and Mechanical Properties of Epoxy/Silica Composites", Journal of Vinyl and Additive Technology, Volume: 23, Pages; E216-E221, 2017.
 
 
18.    Jafar Rezania, Mohammad Hayatipour, Abbas Shockravi, Morteza Ehsani, Vahid Vatanpour, "Synthesis and Characterization of Soluble Aromatic Polyamides Containing Double Sulfide Bond and Thiazole Ring", Journal Polymer Bulletin, , Volume 76, Issue 3, pp 1547–1556, March 2019.
 
 
19.    S.Gh. Hakimabady, M. Ehsani, H.A. Khonakdar, M. Gaffari," Lipid Protection by Control Released Packaging", Iran Polymer Technology; Research and Development, Vol.3, No.1, Issue. No. 9, PP. 43-55. Spring 2018.
 
20.     Jafar Rezania, Vahid Vatanpour, Abbas Shockravi, Morteza Ehsani, "Preparation of Novel Carboxylated Thin-Film Composite Polyamide-Polyester Nanofiltration Membranes with Enhanced Antifouling Property and Water Flux", Reactive and Functional Polymers, Volume 131, October 2018, Pages 123-133
 
21.    S. Shirdel Ghadikolaei, A. Omrani, M. Ehsani, "Influences of Modified Bacterial Cellulose Nanofibers (Bcns) on Structural, Thermophysical, Optical, and Barrier Properties of Poly Ethylene-Co-Vinyl Acetate (EVA) Nanocomposite",  International Journal of Biological Macromolecules, Volume 115, August 2018, Pages 266-272.
 
 
22.    Jafar Rezania, Vahid Vatanpour, Moahammad Hayatipour, Abbas Shockravi, Morteza Ehsani, "Synthesis of a Novel Sulfonated Poly (Amide‐Imide) and its Application in Preparation of Ultrafiltration PES Membranes as a Modifier",  Journal of Applied Polymer Science, 135 (28), 46477, 2018
 
23.    Nouri Arezu, Zahedi Ehsan, Ehsani Morteza, Nouri Azita, Balali Ebrahim, "Understanding the Kinetics and Molecular Mechanism of the Curtius Rearrangement of 3-Oxocyclobutane-1-Carbonyl Azide", Computational and Theoretical Chemistry, Volume 1130, 15 April 2018, Pages 121-129.
 
24.    Majid Habibollahi, Morteza Ehsani, Jalil Morshedian, "Effects of Mixing Strategy on Catalyst-Assisted Reactive Blending of Polycarbonate and Polyethylene Terephthalate", Journal of Vinyl and Additive Technology, Volume25, Issue2, Pages 127-133, May 2019
 
 
25.    Nouri Arezu, Zahedi Ehsan, Ehsani Morteza, Nouri Azita, Balali Ebrahim, "Understanding the Molecular Mechanism of Thio-Claisen Rearrangement of Allyl Phenyl Sulfide and Allyl Vinyl Sulfide Using Bonding Evolution Theory Coupled With NCI Analysis", Journal of Sulfur Chemistry, First Online: 05 Feb 2018:  https://doi.org/10.1080/17415993.2018.1428746- 2018.
 
26.    Marzieh Noori, Fatemeh Ravari, Morteza Ehsani,  “Preparation of PVA Nanofibers Reinforced with Magnetic Graphene by Electrospinning Method and Investigation of Their Degradation Kinetics Using Master Plot Analyses on Solid State”, Journal of Thermal Analysis and Calorimetry, April 2018, Volume 132, Issue 1, pp 397–406.
 
27.    Jafar Rezania, Hadi Behzadi, Abbas Shockravi, Morteza Ehsani, Elaheh Akbarzadeh, "Synthesis and DFT Calculation of Some 2-Aminothiazoles, Journal of Molecular Structure. Volume 1157, Pages 300–305, 5 April 2018.
 
28.    M Kazemi-Ashtiani, M Zandi, M Ehsani, P Shokrollahi, H Baharvand. "Surface Modification of Poly (2-hydroxyethylmethacrylate) Hydrogel for Contact Lens Application", Polymers for Advanced Technologies, 29 (4), 1227-1233 2018
 
29.    A. Shababdoust, M Zandi, M Ehsani, P Shokrollahi, "Fabrication of Curcumin-loaded Electrospun Nanofiberous Polyurethanes with Anti-bacterial Activity", Progress in Biomaterials, (2018) 7:23–33.
 
30.    Shila Shirdel Ghadikolaei, Abdollah Omrani, Morteza Ehsani. "Non-Isothermal Degradation Kinetics of Ethylene-Vinyl Acetate Copolymer Nanocomposite Reinforced With Modified Bacterial Cellulose Nanofibers Using Advanced Isoconversional and Master Plot Analyses", Thermochimica Acta, Volume 655, Pages 87-93, 2017
 
31.    Jafar Rezania, Abbas Shockravi, Morteza Ehsani, Vahid Vatanpour, "Novel Polyimides Based on Diamine Containing Thiazole Units with Thioether Linkage and Pyridine as Pendent Group: Synthesis and Characterization", High Performance Polymers, 30,1-7, 2018
 
 
32.    Maryam Halvaee, Khadijeh Didehban, Vahabodin Goodarzi, Mehdi Ghaffari, Morteza Ehsani, Mohammad Reza Saeb, "Comparison of Pristine and Polyaniline‐Grafted Mwcnts as Conductive Sensor Elements for Phase Change Materials: Thermal Conductivity Trend Analysis",  Journal of Applied Polymer Science, Volume 134, Issue 47. 2017
 
33.    Z. Rajabtabar Darvish, M. Ehsani, A. Ghadami, S. M. B. Alavi, "Importance of Gel Coating in Composite Structures and the Effect of Nanofillers on Their Properties Improvement", Basparesh, Quarterly, 2017, Volume 7, Number 2, Pages 52-63, ISSN: 2252-0449.
 
34.    Kh. Ghanbari, M. Ehsani, A. Jannesari, M. Mohseni, M. Ghaffari, Thermoanalytical study of siloxane-polyurethane coatings: Kinetic deconvolution of overlapping heterogeneous curing reactions, Progress in Organic Coatings, 112, 234-243, 2017.
 
35.    M Bahrami, JC Furgal, H Hashemi, M Ehsani, Y Jahani, T Goodson, R Laine, "[PhSiO1.5]8,10,12 as nanoreactors for non-enzymatic introduction of ortho, meta or para-hydroxyl groups to aromatic molecules". Dalton Transactions, 2017 Jul 11; 46(27):8797-8808.
 
36.    E. Aram, M. Ehsani, H.A. Khonakdar, Chemically functionalized graphene nano- sheets and their influence on thermal stability, mechanical, morphological and electrical properties of poly (methyl methacrylate)/poly(ethylene oxide) blend, Polymer-Plastics Technology and Engineering volume 57, issue 3, pages: 156-165, 2018.
 
37.      S. Abdollahi, M. Ehsani, J. Morshedian, H. A Khonakdar, Uta Reuter, "Structural and electrochemical properties of PEO/PAN nanofibrous blends: Prediction of graphene localization", Polymer Composites,  Volume39, Issue10, Pages 3626-3635, October 2018
 
38.    S. Abdollahi, M. Ehsani, J. Morshedian, H. A Khonakdar, Morphology and physical properties of electrospun polyethylene oxide/polyacrylonitrile mats and related graphene-based nanocomposites,  Journal of Vinyl and additive Technology, Volume23, IssueS1,Special Issue: Nanocomposites, September 2017,Pages E152-E159.
 
39.    A Ghadami, M Ehsani, H Haddadi, B. Kaffashi, "Effect of Micro Glass Flake on Morphological and Rheological Behaviour of Epoxy Vinyl Ester Composite Coatings", Progress in Color, Colorants and Coatings, Vol. 10, No.1, 2017, pages 31 – 41.
 
40.    M Kazemi-Ashtiani, M Zandi, J Barzin, Y Tahamtan,  M Ghanian, A Moradmand, M Ehsani, H Nezari, M Rezaei Larijani, H Baharvand, "Substrate-mediated commitment of human embryonic stem cells for hepatic differentiation", Journal of Biomedical Materials Research: Part A.  2016 Nov;104(11):2861-72
 
41.    S Shirdel Ghadikolaei, A Omrani,  M Ehsani, "Impact of Bacterial Cellulose Nanofibers on the Nonisothermal Crystallization Kinetics of Ethylene−Vinyl Acetate Copolymer", Industrial & Engineering Chemistry Research, 2016, 55, 8248−8257

 
42.    A. Ghadami, M. Ehsani, H.A. Khonakdar, "A comprehensive study on morphological and rheological behavior of PET and PEN nanocomposite blends in presence of graphene", Journal of Vinyl and Additive Technology, December, 23, S1, 2017, E160–E169.
 
43.    M. Gaffari, M. Ehsani, M.vandalvand, E.avazverdi, A.askari, A.goudarzi, "Studying the effect of micro- and nano-sized ZnO particles on the curing kinetic of epoxy/polyaminoamide system", Progress in organic coatings, 89, 277-283, 2015.
 
44.    M Bahrami, JC Furgal, H Hashemi, M Ehsani, Y Jahani, T Goodson, R Laine,   "Synthesis and Characterization of Nano-Building Blocks [O-RStyrPhSiO1. 5] 10, 12 (R= Me-, MeO-, NBoc-and CN. Unexpected Photophysical Properties Arising from Apparent Asymmetric Cage Functionalization as Supported by Modelling Studies", Journal of Physical Chemistry C, 119 (28), pp 15846–15858, 2015
 
45.    A Ghadami, M Ehsani, HA Khonakdar, "Interrelationship of thermal and mechanical properties of poly (ethylene terephthalate)/poly (ethylene 2, 6‐naphthalate)/graphene nanocomposites", Journal of Vinyl and Additive Technology, 23, 3, 2017,: 210–218
 
46.    M. Faghih, M.Zandi, P.Shokrollahi, M. Ehsani, "Synthesis and Characterization of Curcumin Segmented Polyurethane with Induced Antiplatelet Activity", Journal of Polymer Research. 2015, 22:179.
 
47.    M. Mohammadi, A. Yousefi, M. Ehsani, "Charactrizing films of polyethylene blends: An application of colorometric parameters measurements", Prog. Color Colorants Coat. 8 (2015), 219-235.
 
48.    Hossein  Ghanian, Zahra  Farzaneh, Jalal Barzin, Mojgan Zandi, Mohammad Kazemi-ashtiani,  Mehdi Alikhani, Morteza Ehsani, Hossein Baharvand, "Nanotopographical Control of Human Embryonic Stem Cell Differentiation into Definitive Endoderm Using Fibrous Substrates", Journal of Biomedical Materials Research: Part A, Volume 103, Issue 11, November 2015, Pages 3539–3553.
 
49.    Hossein  Ghanian, Jalal Barzin, Mojgan Zandi, Morteza Ehsani, Mohammad Kazemi-ashtiani, "Controlling the Orientation of Electrospun Nanofibers by Conductive-Insulating Hybrid Collectors", Polymerization Quarterly, 2014, Volume 4, Number 2. Pages 51-58.
 
50.    A Motahari, AA Rostami, A Omrani, M Ehsani, "On the Thermal Degradation of a Novel Epoxy-Based Nanocomposite Cured With Tryptophan as an Environment-Friendly Curing Agent", Journal of Macromolecular Science, Part B, 54 (5), 517-532.
 
51.    Masoumeh Nazem Salimi. Abolfazl Alizadeh Sahraei, Majid Baniasadi, Karen Abrinia, Morteza Ehsani, "Synergistic Effect of Carbon Nanotubes and Copper Particles in an Epoxy Based Nanocomposite Using Electroless Copper Deposited Carbon Nanotubes: Part I – Mechanical Properties", Journal of Composite Materials, 2015. 50, no. 14 (2015): 1909-1920.
 
52.    M. Mohamadi, A. A. Yousefi, M. Ehsani, "Characterizing films of polyethylene blends: An application of colorimetric parameters measurements", Progress in Color, Colorants and Coatings, 8, 219-235, 2015.
 
53.    E Aram, M Ehsani, HA Khonakdar, "Improvement of ionic conductivity and performance of quasi-solid-state dye sensitized solar cell using PEO/PMMA gel electrolyte", Thermochimica Acta, Vol. 615, pp. 61-67, 2015.
 
54.    S Salehi, M Ehsani, H. A. Khonakdar,, "Assessment of thermal, morphological, and mechanical properties of poly(methyl methacrylate)/glass flake composites", Journal of Vinyl and Additive Technology, 23, 1, 2017, Pages: 62–69.
 
55.    M. Ehsani, K.  Khodabakhshi, M. Asgari, "Lactide synthesis optimization; an investigation on temperature, catalyst and pressure effects", E-Polymer, 14 (5), 353-361, 2014
 
56.    M Ghaffari, R. Naderi, M.  Ehsani, “Effect of silane as surface modifier and coupling agent on rheological and protective performance of  epoxy/nanoglassflake coating systems”, Iranian Polymer Journal, 23 (7), 559-567, 2013
 
57.    A. Ghadami, M. Ehsani, H.A. Khonakdar, “Vinyl ester/ glass flake nanocomposites: An overview of chemical and physical properties", Journal of composite materials, Vol.76, Issue 1, Pages 238-243, 2013.
 
58.    A. Motahari, A. Omrani, A.A. Rostami, M. Ehsani, “Preparation and characterization of a novel epoxy based nanocomposite using tryptophan as an eco-friendly curing agent”, Thermochimica Acta, Vol. 574,  pp. 38-46, 2013
 
59.    M. Ghaffari, M. Ehsani, H. A. Khonakdar, “Morphology, rheological and protective properties of epoxy/nano-glassflake systems”, Progress in Organic Coatings, Vol 77, Issue 1, 124-130, 2014
 
60.    M  Khiabani Moghadam; J  Morshedian; M  Ehsani; R  Laine; L  Yan Kuang; N  Umehara,“Study on effects of Ph12SQ on the thermal stability and mechanical properties of high temperature vulcanized (HTV) silicone rubber”,  IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 21, Issue 1, pp. 244-252,  2014.
 
61.    M.  Khiabani Moghadam, J  Morshedian, M  Ehsani, M  Bahrami, H  Sadadi, “Lifetime prediction of HV Silicone rubber insulators based on mechanical tests after thermal ageing”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 20, Issue 3, pp. 711-716, June 2013.
 
62.    Omrani A. Rostami A. Ravari F. Ehsani M. "The relationship between composition and electrical properties of brass covered by a nanocomposite coating of glycerol diglycidyl ether: An EIS and DMTA study", Progress in organic coatings; 76, 2-3; 360-366; 2013.
 
63.    M. Ehsani, H.A. Khonakdar, A. Ghadami, “Assessment of morphological, thermal and viscoelastic properties of epoxy vinyl ester coating composites: role of glass flake and mixing method”, Progress in Organic Coatings, 76,238-243, 2013.
 
64.    A. Ghadami, M. Ehsani, H. A. Khonakdar, “Effect of micro and nano glass flake on curing kinetic and anti -corrosive properties of vinyl ester composite coating”, Journal of Advanced Materials and Novel Coatings, 4, 286-275, 2013.
 
65.    M Haghnegahdar, G Naderi, GR Bakhshandeh, S Shokoohi, M Ehsani, “An Investigation into Elastomer Nanocomposites Based on SBR/Epoxy-Polyester Hybrid/Organoclay”, Materials Research Innovations, Vol.17, No 7,483-489, 2013.
 
66.    Z. Soltani, F. Ziaei, M. Ehsani, M. Gaffari, H. Afrideh, "Study of the electron beam effect on mechanical properties and structure of polyethylene – heydroxyapatite nanocomposite", Journal of Alloys and Composite Materials, (Persian), Accepted, inpress.
 
67.    S. Zooghi, G.Naderi, GR.Bakhshandeh, M.Ehsani, S.Shokoohi, "Study of mechanical properties and nano structure of nanocomposite based on butadiene rubber- nanoclay and epoxy-polyester hybride, Journal of Science and Technology of Polymer, (Persian), 26, 2, 2013.
 
68.    Z. Soltani, F. Ziaei, M. Gaffari, H. Afarideh, M. Ehsani, “Mechanical and Thermal Properties & Morphological Studies of 10 MeV Electron Beam Irradiated LDPE/Hydroxyapatite Nano-Composite”, Radiation Physics and Chemistry, Volume 83, February 2013, Pages 79-85.
 
69.    Z. Farhadinejad, M. Ehsani, S. Momenbellah, "Dynamic mechanical and thermal behavior evaluation of an epoxy/anhydride/nano Al2O3 composite system”, High Performance Polymers, 25 (5), 518-525, 2013.
 
70.    Farhadinejad Z., Ehsani M., Khosravian B., Ebrahimi G.: Investigation of epoxy-polyester resin resulting from waste powder coating on the physical and mechanical properties of wood poly (propylene) composite: Journal of Color Science and Technology (In Persian), Vol 6. 321-327, 2013.
 
71.    A. Asadinezhad, S. H. Jafari, U. Wagenknecht, M. Ehsani, "Nanofilled Polypropylene/Poly (trimethylene terephthalate) Blends: A Morphological and Mechanical Properties Study”, Journal of Macromolecular Science: Part B: Physics. 52, 897-909, 2013.
 
72.    M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. V. Assche, H. Terryn, "The kinetic analysis of isothermal curing reaction of an epoxy resin-glass flake nano composite", Thermochimica Acta, Vol. 549,  pp. 81-86, 2012
 
73.    Z. Farhadinejad, M. Ehsani, S. Momenbellah, M. M. Saei-Shirazi, S. M. B. Alavi and H. Borsi, “An Investigation of Thermal, Physical and Electrical Properties and Morphological Behavior on Nano Epoxy Composite Insulation”, IEEE Transaction on nanotechnology, Vol. 11, Issue: 5  pp. 957 – 963, 2012.
 
74.    Z. Farhadinejad, M. Ehsani, I. Ahmadi-Joneidi, A.A. Shayegani-Akmal, H. Mohseni, “An Investigation of the Effect of UVC Radiation on Thermal, Electrical Properties and morphological behavior of Silicone Rubber Insulators”, IEEE Transaction on Dielectric and Electrical Insulations, Vol. 19, Issue 5, pp. 1740-1749, 2012.
 
75.    Z. Farhadinejad, M. Ehsani, B. Khosravian, G. Ebrahimi, “Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler”, European Journal of Wood and Wood Products, 2012, Volume 70, Issue 6, pp 823-828.
 
76.    M. Ghaffari, M. Ehsani, H. A. Khonakdar, “Effect of surface chemical treatment on carbon steel/epoxy coating Delamination”, Journal of Advanced Materials and novel coatings, Vol. 1, pp.35-40, (2012).
 
77.    F. Ravari, A. Omrani, A. A. Rostami, M. Ehsani, “Ageing effects on electrical, morphology, and mechanical properties of a low viscous epoxy nanocomposite”, Polymer Degradation and Stability, vol. 97, pp. 929-935, 2012.
 
78.    M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. V. Assche, H. Terryn, “Evaluation of curing kinetic parameters of an Epoxy/ Polyaminoamide/Nano-glassflake system by non-isothermal differential scanning Calorimetry”, Thermochimica Acta, 533, 10-15,2012.
 
79.    M. Ehsani, Z. Farhadinejad, D. Ronasi, “Calculation of molecural weight and epoxy equivalent weight by proton nuclear magnetic resonance spectroscopy”, Bashparesh, 2, 16-21, 2012.
 
80.    M. Mousaei, M.A. Faghihi Sani, S. Baghshahi, M. Ehsani, “Hydrothermal synthesis of CoAl2O4 blue nano-pigment”, Journal of Color Science and Thechnology (In Persian), vol 6,263-270 (2013).
 
81.    A. Allahverdi, M. Ehsani, H. Janpour, “The Effect of Nanosilica on Mechanical, Thermal and Morphological Properties of Epoxy Coating”, Progress in Organic Coatings, 75, pp.543-548, 2012
 
82.    M. Mohammadi, A. Yousefi, M. Ehsani, “Thermorheological analysis of blend of high- and low-density polyethylenes”, Journal of Polymer Research, 2012,19, 9798-9809.
 
83.    M. Mohammadi, A. Yousefi, M. Ehsani, “Study of the thermal and mechanical properties of blown films of high- and low- density polyethylene blends”, Journal of Applied Polymer Science, 2012, 125, 755-767.
 
84.    S. R. Mohammadi, H. A. Khonakdar, M. Ehsani, S. H. Jafari, U. Wagenknecht, B. Kretzschmar, “Investigation of Thermal Behavior and Decomposition Kinetic of PET/PEN Blends and their clay containing nanocomposites”, Journal of Polymer Research, 18: 1765-1775, 2011
 
85.    M.A. Shamekhi, S.H. Jafari, H.A. Khonakdar, M. Ehsani, “Preparation and characterization of UV irradiation cross-linked LDPE/EVA blends”, Plastic, Rubber and Composites, 39: 109-110, 2010

 
86.    M. Ehsani. Y. Jahani, "An Investigation of Powder Coating Waste Effect on Morphological and Mechanical Properties of PP-Talc Composites", Journal of Color Science and Technology (Persian), 3: 223-232, 2010
 
87.    H.A. Khonakdar, H. Jafari,, M. Ehsani, A. Asadinejad, “Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models”, Iranian Polymer and Technology Journal (Persian), 5: 399-405, 2010
 
88.    M. Ehsani, A. A. Yousefi, S. Samiei Yeganeh, “Study of Rheological behaviors of Electrostatic Thermoset Powder Coatings”, E-Polymer, No.140, 2009
 
89.    Y. Jahani, M. Ehsani, "The effects of Epoxy Resin Nano Particles on Shrinkage Behavior and Thermal Stability of Talc-Filled Polypropylene", Polymer Bulletin, 63: 743-754, 2009
 
90.    M. Ehsani, M. Badripour, M. H. R. Ghoreishy, "Study and Evaluation of EPDM Increasing in NR/BR Compounds by Reactive Processing”, Iranian Polymer and Technology Journal (Persian), 18: 149-157, 2009
 
91.    F. Farhang, M.Ehsani, S. H. Jazayeri, “Effects of the Filler Type and Quantity on the Flashover Voltage and Hydrophobicity of RTV Silicone Rubber Coatings”, Iranian Polymer Journal, 18: 149-157, 2009
 
92.    Y. Jahani, M. Ehsani, “The rheological modification of talc-filled polypropylene by epoxy-polyester hybrid resin and its effect on morphology, crystallinity, and mechanical properties”, Polymer Engineering & Science, 49: 619-629, 2009.
 
93.    M. Ehsani, M. Abtahi, M.E. Zeynali, A.A. Harati, "LDPE/EPDM Blends with Unique Surface, Electrical and Mechanical Properties for Electrical Insulators", Iranian Polymer Journal, 18: 37-47, 2009.
 
94.    S. H Jazayeri, M. Ehsani, F. Farhang, "Study of Silicone Rubber Coatings (RTV) Role on Improvement of the Ceramic Insulators Behavior in Contaminated Areas”, Journal of Color Science and Technology, 2: 9-22, 2008.
 
95.    M. Ehsani, M. Barikani, T.S. Porkar, "Synthesis and Application of Silicone-Alkyds in Stoving Paint and Zinc-Rich Primers". Journal of Color Science and Technology. 2:123-128, 2008.
 
96.    M. Razavi-Nouri, J. Morshedian, M. Ehsani, F. Faghihi, “Mechanical Properties & Morphology of Low Density Polyethylene/Polydimethylsiloxane Immisible Blends: Modeling & Influence of Curing Agent”, E-Polymers, 14: 1-14, 2008.
 
97.    F. Faghihi, J. Morshedian, M. Razavi-Nouri, M. Ehsani, "Dynamic Rheological and Mechanical Behaviours of Poly (Dimethylsiloxane)/Low Density Polyethylene Immisible Blends: Interfacial Modification via Reactive Blending", Iranian Polymer Journal, 17: 755-765, 2008.
 
98.    M. Ehsani, G.R. Bakhshandeh, J. Morshedian H. Borsi, E. Gockenbach; “The Dielectric Behavior of Outdoor High Voltage Polymeric Insulation Due to Environmental Aging”, Journal of European Transactions on Electrical Power, 17: 47-59, 2007
 
99.    M. Ehsani, A. Harati, "Introduction to Powder Coating II”, Industry Journal Paint and Resin, 831-23, 2006
 
100.    M. Ehsani, G.R. Bakhshandeh, F. Kavosi, "Application and Properties of Modified Asphalt with Scrap Tyres", Iranian Rubber Magazine Special Issue, Recycling of Rubber, 11(42): 94-100, 2006.
 
101.    M. Ehsani, A. Harati, "Introduction to Powder Coating I”, Industry Journal Paint and Resin”, 8(26): 20-23, 2006.
 
102.    M. Ehsani, H. Borsi, E. Gockenbach, G.R. Bakhshandeh J. Morshedian; “Modified Silicone Rubber for Use as High Voltage Outdoor Insulators”, Journal of Advances in Polymer Technology, 24 (1): 51-61, 2005.
 
103.    M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh; “An Investigation of Dynamic Mechanical, Thermal, and Electrical Properties of housing materials for outdoor Polymeric Insulators”, European Polymer Journal, 40(11): 2495-2503, 2004.
 
104.    M. Ehsani, M. Barikani; Properties of Silicone Modified Alkyd Resin, Journal of Baspar, 3(3): 32, 2003
 

 
International and National Conferences

1.    S. Safari, M. Ehsani, M. Zandi , Nano Thermo-Responsive Gel based on PNVCL for Biomedical Applications, International Conference and Exhibition on Advanced & Nano Materials, ICANM 2018: Quebec city,Canada.
2.    S. Safari, M. Ehsani, M. Zandi Thermo-responsive Copolymer based on PNVCL, International Conference on Materials,  ICMS 2018,  August 17 - 18, 2018,  Toronto, Ontario, Canada
3.    S. Abdollahi, M. Ehsani, J. Morshedian, H.A .Khonakdar, Structural and electrochemical properties of PEO/PAN/grapheme nanofibrous membranes, Europe Africa Conference  PPS 2017.
 
4.    M. Habibelahi, J. Morshedian, M. Ehsani, The Effect of Impact Modifiers of ABS, LLDPE and POE on mechanical Properties of Engineering Compounds of PC/PET, The First International Masterbatch & Polymer Compounds Conference 14-15 Feb 2016
 
5.    R. Rezaie, M. Ehseni, A. A. Yousefi, D. Nazari, Rheological properties of PC and PET Blends, ISPST 2016
 
6.    Z. Emami, M. Ehsani, M. Zandi, Preparation and characterization of oxidized alginate biopolymer: Effects of oxidation conditions, International Seminar on Polymer Science and Technology, 2016
 
7.    M. Kazemi Ashtiani, M. Zandi, P. Shokrollahi, M. Ehsani, Ho. Baharvand, Chitosan-conjugated Poly(2-hydroxyethyl methacrylat e) for Contact Lens Application, International Seminar on Polymer Science and Technology, 2016
 
8.    S. Azarabtin, M. Ehsani, S. M. M. Mortazavi, S. Ahmadjo, M. Sabzehkar, H. Ranjbar, The performance of waste disulfide oil (DSO) on the devulcanization of  waste tires, 12th International Seminar on Polymer Science and Technology, 2016
 
9.    M. Zandi, M. Kazemi Ashtiani, P. Shokrollahi, M. Ehsani, Ho. Baharvand, Simple and Cost-Effective Method for Modification of PHEMA as Low Fouling Surface, ICANM 2015
 
10.    M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand, Hybrid Nanofibrous Scaffolds with In Situ Pore Extension Potential, ICANM 2015
 
11.    M. Mohammadi, A. Azizi, A. A. Yousefi, M. Ehsani, Effect of Temperature on melt behavior of Polyethylene Blends: a Study of Cole-Cole Plots, ISPST 2014, 6-9 October 2014
 
12.     M. Bahrami, J. Furgal, M. Ehsani, Y. Jahani, R. Laine, Synthesis, characterization, and photophysical properties of polyfunctional nanobuilding phenylsilsesquioxanes: [R0.5PhSiO1.5]10, [RPhSiO1.5]10 ,[R0.5PhSiO1.5]12 and [RPhSiO1.5]12 compounds, ACS 248th, San Francisco, CA, 2014
                                  
13.    M. Mohammadi, A. Azizi, A. A. Yousefi, M. Ehsani, Investigating Han Plots of Polyethylene Blends at Different Temperatures, ISPST 2014, 6-9 October 2014
                                  
14.    H. Enshaei, M. H. Beheshty, M. Ehsani, Investigation the Effect of Aromatic Amine on Curing and Thermal Behavior of Epoxy Resin, ISPST 2014, 6-9 October 2014
                                  
15.    E. Aram, M. Ehsani, H. A. khonakdar, N. Riahi nouri, Poly(ethylene oxide)-poly(methyl methacrylate) gel electrolyte for dye-sensitized solar cells, ISPST 2014, 6-9 October 2014                                  
16.    M. Bahrami, M. Ehsani, Y. Jahani, M. Davachi, R. Laine, Diiodination of Deca and Dodeca Silsesquioxanes  A new rout to highly functionalized nano bulding block Silsesquixane cages, ISPST 2014, 6-9 October 2014
                                  
17.    M. Ghaffari, M. Vandalvand, E. Avazverdi, M. Ehsani, The kinetic analysis of isothermal curing reaction of ZnO filled epoxy Resin, ISPST 2014, 6-9 October 2014
                                  
18.    D. Fattahinezhad, M. B. alavi, M. Ehsani, Kh. Khodabakhshi, Investigating the Influence of Nanoglass Flake and Glassfibers on the Flaxtural Properties of Neopantylglycol Unsaturated Polyester Resin, ISPST 2014, 6-9 October 2014
                                  
19.    Z. Rajabtabar, M. Ehsani, M. B. Alavi, Kh. Khodabakhshi, Investigation of Morphology and Impact Resistance of Nano-Graphene Composite based on Ester Gelcoats, ISPST 2014, 6-9 October 2014
                                  
20.    Z. Rajabtabar, M. Ehsani, M. B. Alavi, Kh. Khodabakhshi, Study of Water Absorption Behavior in IPN Polymeric Systems, ISPST 2014, 6-9 October 2014
                                  
21.    M. Habibelahi, M. Assemi, M. Ehsani, J. Morshedian, Structure Changes in the PC/PET Transesterification Affected by Reaction Time and Catalyst Concentration, ISPST 2014, 6-9 October 2014
 
                                  
22.    M. Faghih abdollahi, M. Ehsani*, M. Zandi, P. Shokrollahi, The Effect of Diferuloylmethane as a Chain Extender on Surface Properties of Biodegradable Segmented Thermoplastic Polyurethane Elastomers, ISPST 2014, 6-9 October 2014                                
23.    M. Ehsani, B. Kaviani, S. Salehi, Study on Mechanical Properties, Thermal Stability and Crystallization Behavior of PET-glass Flake Nano Composites, ISPST 2014, 6-9 October 2014                                                                                                   
 
24.    M. Ehsani, H. A. Khonakdar, S. Salehi, N. Riahi nouri, A. Mehdi Khani, Investigation of the effect of nano glass flake (NGF) on physical and optical properties of poly (methyl methacrylate) as substrate of solar cell, 28th international power system conference, Tehran, 2013.
 
25.    B. Kaviani, M. Ehsani, H. A. Khonakdar, N. Riahi nouri, A. Mehdi Khani, Investigation of the effect of Nano Glass Flake on the properties of PET, 28th international power system conference, Tehran, 2013.
 
26.    M. Ehsani, S. Salehi, B. Kaviani،"Preparation and Characterization of High Transparent PMMA/glass Flake Composites"،The 16th Iranian Chemistry Congress, Yazd University, 5-7 september 2013،Yazd University،2013
 
27.    M. Ehsani, B. Kaviani, S. Salehi, Study on Mechanical Properties, Thermal Stability and Crystallization Behavior of PET-glass Flake Nano Composites،The 16th Iranian Chemistry Congress, Yazd University, 5-7 September 2013،Yazd University،2013
 
28.    M. Mohammadi, A. A. Yousefi, M. Ehsani، Dynamic temperature sweep experiments on blend of high- and lowdensity polyethylene،ISPST2012, Amirkabir University of Technology, Tehran, Iran ،2012
 
29.    M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand، Fabrication of Uniform Electrospun Poly(ε-caprolactone) Microfibers Using Cationic Surfactant، ISPST 2012, Amirkabir University of Technology, Tehran, Iran،2012
 
30.    M. H. Ghanian, M. Zandi, J. Barzin, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand، Reducing Diameter and Variability of Electrospun Poly(e-caprolactone) Nanofibers Using Charged Additives،The 14th Iranian National Chemical Engineering Congress (IChEC 2012) Sharif University of Technology،Sharif University of Technology, Tehran ،2012
 
31.    M. H. Ghanian, M. Ehsani, J. Barzin, M. Zandi, M. K. Ashtiani, Optimizing Topographical Features of Electrospun Nanofibers foe Efficient Endodermal Differentation of Human Induced Pluripotent Stem Cells،10th Annual Meeting International Society for Stem Cell Research, June 13-16, 2012 ،Yokohama, Japan،2012
 
32.    Mehdi Gaffari, Morteza Ehsani, Hossein Ali Khonakdar, Peyman Taheri, Herman Terryn, Investigation of the effect of chemical surface treatments on interfacial properties of Epoxy-carbon steel, ISPST 2012,Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.
 
33.    Mehdi Gaffari, Morteza Ehsani, Hossein Ali Khonakdar, Investigation of morphology and rheological properties of glass flake/epoxy nanocomposites systems, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.
 
34.    Z. Farhadinezhad, M. Ehsani, S. Moemen bellah, M. B. Alavi، Study of the Effect of Nano Alumina on Electrical and Mechanical Properties of Cast Epoxy Composite ،PPS 2011, November 15-17, 2011, Kish Island, Iran،Kish Island, Iran،2011
 
35.    M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. Van Assche, H. Terryn, Study on the Rheological Properties of Epoxy/Nano-Glassflake Composite،AERC 2011, 7th Annual European Rheology Conference, 10-14 May 2011،Russia،2011
 
 
36.    Z.Farhadinejad, M.Ehsani, S. Moemen bellah, S.M. B. Alavi, M. M. Saei-shirazi and H. Borsi, An investigation of the effect of nano alumina on the electrical and thermal properties and morphological behavior of the cast epoxy nano composite, XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011
 
37.    M. Bayani, M. Ehsani, A. Mehdikhani, The effect of ultraviolet (UV) radiation and humidity stress on silicone rubber insulator behavior, XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011
 
38.    Z. Farhadinejad, M. Ehsani, S. Momen bellah, S. M. B. Alavi, Study of the effect of nano alumina on electrical and mechanical properties of cast epoxy composite, Proceedings of the Polymer Processing Society Asia/Australia Regional Meeting,  PPS-2011,  Kish Island (Iran), November 15-17, 2011
 
39.    M.Ehsani, Z.Farhadinejad, S. Moemen-bellah, S. M. B. Alavi, M. M. Saei Shirazi, H. Borsi, “Electrical, dynamic-mechanical, thermal and morphological behaviors of epoxy-nano alumina systems” 26th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011
 
40.    M. Bayani, M. Ehsani, A. Mehdikhani, Investigation of silicone insulators’ behaviour under ultraviolet (UV) radiation and humidity stress, 26th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011
 
41.    M.K. Moghadam, M. Keramati, H. Beirami and M. Ehsani, “Investigation on aging in different parts of an silicon insulator”, XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011
 
42.    M.K. Moghadam, M. Keramati, I. Motamedi, H. Beirami and M. Ehsani, "Evaluation of aging in different parts of silicone insulator", 26th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011
 
43.    M. Mousaei, M.A.Faghihi-Sani, S. Baghshahi, M. Ehsani, “Synthesis of blue pigment of nano alumina cobalt by hydrothermal method” 8th Iranian conference of ceramic, Tehran, Iran, 3-4 May, 2011
 
44.    H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, A. Alipour, “Preparation and properties of nanoclay and powder coating waste in NBR compounds”, International Congress on Nanoscience an Nanotechnology, ICNN, Shiraz, Iran, 9-11 November 2010
 
45.    H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, “Investigation of mechanical and rheological properties of nanocomposites based on NBR/nanoclay”, 8th Nanothechnology Iranian Student Conference, NaN, Mashhad, Iran, 1-2 December, 2010
 
46.    H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, A. Alipour, “Effect of two types of filler on cure characteristic and mechanical properties of NBR rubber compound”, 10th Iran Rubber Industries Conference & Expo, Tehran, Iran, 2010.
 
47.    B. Kaffashi, H. Haddadi, M. Ehsani, A. Ghadami, “The effect of modified glass flakes on rheological properties of glass flake-epoxy vinyl ester composites”, 13th Iranian National Chemical Engineering Congress and 1st International Regional Chemical and Petroleum Engineering, Kermanshah, Iran, 25-28 October, 2010
 
48.    B. Kaffashi , M. Ehsani, H. Haddadi, “The effect of mixing procedure on rheological properties of glass flake-epoxy vinyl ester Composites” The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA- 2), Kish Island, Iran, Dec. 27-30, 2010
 
49.    M. Ehsani, F. Farhang, Investigation of discharge voltage of porcelain insulators with different RTV silicone coatings in polluted environment”, 25th International power system conference, PSC 2010, Tehran, Iran, 2010
 
50.    S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, S. Shokoohi, “Polymer nanocomposites based on butadiene rubber/ powder coating waste/ nanoclay”, International Congress on Nanoscience and Nanotechnology Shiraz, Iran, 9-11 November, 2010.
 
51.    S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, S. Shokoohi, “Polymer Nanocomposites Based on Butadiene Rubber/Powder coating waste/nanoclay”, ASPM 2010, 8-10 Austria, 2010. 
 
52.    S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, “Improvement of mechanical properties and morphology of BR elastomer by Nanoclay and waste paint powder”, 10th Iran Rubber Industries Conference & Expo, Tehran, Iran, 2010.
 
53.    M. .Mohammadi, A. A. Yousefi, M. Ehsani, "Differential Scanning Calorimetric Investigation of Polyethylene Blends", 9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.
 
54.    B.Shirkvand, M. Ehsani, A.Rabbii "Synthesis of Naphthalene Sulfonate Formaldehyde Condensate as in Dispersing Agent", 9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.
 
55.    M. Ghafari, M. Ehsani, A. Ghadami, H.A.Khonakdar "Epoxy/Glass Flake Composite: Curing Kinetics, Glass Transition Temperature and degradation Temprature", 9th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.
 
56.    M. Ehsani, Y. Jahani, M. Gafari, "The Effect of Epoxy-Polyester on Rheology, Morphology and Mechanical Properties of Talc-Reinforced Polypropylene". European Polymer Congers, EPF 2009, Graz, Austria., 2009
 
57.    S. H. Jazayeri, M. Ehsani, F. Farhang, " Improvement of Porcelain Insulators Behavior Under Wet & Polluted Conditions", The 2nd International Conference on Ceramics (Global Roadmap for Ceramics-ICC2) Proceedings, Verona, Italia, (29-4) Jun- July, 2008
 
58.    M. Badripour, M. Ehsani, M.; Ghoreishy, M.H.R."Effect of pre-cured EPDM in NRBR blend properties for tire sidewall", 9th Iranian National Rubber Conference, Kish, Iran, 2008.
59.    M. Abtahi,  M. E. Zeynali, M. Ehsani, A. A. Harati, T. Darestani, "LDPE/EPDM Blends with Unique Surface, Electrical & Mechanical Properties for Electrical Insulator", The 5th International Chemical Engineering Congress & Exhibition, Kish, Iran, 2008.
 
60.    M. Ehsani, G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Erosion and Tracking Characterization of Outdoor Composite Insulators”, 15th International Symposium on High Voltage Engineering (ISH, Ljubljana, Slovenia), August 27-31, 2007.
 
61.    M. Ehsani, M.Abtahi, A.Harati, “Study of Electrical, Surface and Mechanical Properties of EPDM-LDPE Blends for Use as Outdoor Electrical Insulators”, 15th International Symposium on High Voltage Engineering (ISH), Ljubljana, Slovenia, August 27-31, 2007.
 
62.    Y. Jahani, M. Ehsani, "Modification of PP-Talc Composite by Reactive Mixing With Hybrid Epoxy-Polyester Resin", IUPAC-2006, South Africa, Syellenbusch, 2006.
 
63.    M. Ehsani, M. Karabi, S. Soltani, “Application of Stress Relaxation Behavior for Evaluation of Processability of Raw Rubbers”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, , Yamagata, Japan July 2-6, 2006.
 
64.    M. Abtahi, M. Ehsani, T. Darestani Farahani, “Powder Coating Waste as New Filler for Rubber Compound”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
 
65.    M. Karrabi, M. Ehsani, S. Soltani, “Curing Characterization of Styrene-butadiene-rubber compound using RPA”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
 
66.    M. Abtahi, M.E. Zeynali, M. Ehsani, A.A. Harati, “Study of Electrical, Rheological and Mechanical Properties of LDPE/EPDM Blends for Use as Electrical Insulators”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
 
67.    H. Baharvand, M. Ehsani, “Mechanical, Thermal and Rheological Behavior of Styrene-Butadiene Rubber Filled with Nano Organoclay as Filler”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.
 
68.    Y. Jahani, M. Ehsani, “Effects of Powder Coating Waste on Mechanical, Rheological, and Thermal Properties of Talc Filled PP”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Japan, July 2-6, 2006, Yamagata.
 
69.    M. Ehsani,  G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Surface Degradation of Outdoor Polymeric Insulators Resulting from Electrical and Environmental Stress”, 20th International Power System Conference (PSC 2005, Tehran, Iran), November 14-16, 2005.
 
70.    M. Ehsani, M. Abtahi, M. E. Zeynali, A.A. Harati, “Effect of EPDM on the Mechanical, Thermal, and Dynamical Mechanical Properties of Blends LDPE”. International Seminar on Polymer Science and Technology (ISPST 2005, Tehran, Iran), September27-29, 2005.
 
71.    M. E. Zeynali, M. Abtahi, M. Ehsani, A.A. Harati, “Synthesis of partially hydrolyzed polyacrylamide & investigation of solution properties (viscosity behavior)”. International Seminar on Polymer Science and Technology (ISPST 2005, Tehran, Iran.
 
72.    M. Ehsani,  G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Study of Electrical, Mechanical and Surface Properties of Composite Insulators”, 14th International Symposium on High Voltage Engineering (ISH), Beijing, China, August 25-29, 2005.
 
73.    M. Ehsani, G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Effect of LDPE on the Mechanical, Electrical and Dynamical Mechanical Properties of Blends of EPDM-Silicone Rubbers”, Polymer Processing Society (PPS-2005) America’s Regional Meeting, Quebec, Canada August 14-17, 2005.
 
74.    M. Ehsani, H. Borsi, E. Gockenbach,  G.R. Bakhshandeh, J. Morshedian, “Improvement of Tracking and Erosion Behavior of Outdoor Insulation with a new Polymeric Alloy”, Grenzflächen in Elektrischen Isoliersystemen, Beanspruchungen, Design, prǘfverfahren, Lebensdauer, Hanau, Germany, 8-9 March 2005.
 
75.    M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian G.R. Bakhshandeh, “Improvement of Tracking and Erosion Behavior of Outdoor Insulation with a new Polymeric Alloy”,  IEEE International Symposium on Electrical Insulation, Indiana, USA, 19-22 September 2004.
 
76.    M. Ehsani, H. Borsi, E. Gockenbach,  G.R. Bakhshandeh, J. Morshedian “Improvement of Electrical, Mechanical and Surface Properties of Silicone Insulators”, IEEE Conference on Electrical Insulation and Dielectric Phenomena, Boulder, Colorado, USA, 17-20 October, 2004.
 
77.    M. Ehsani, H. Borsi, E. Gockenbach, G.R. Bakhshandeh, J. Morshedian, N. Abedi.; “study of Electrical, Dynamical and Mechanical and Surface Properties of Silicone-EPDM Blends”, 8th  IEEE International Conferences on Solid Dielectrics, Toulouse, France, July 5-9, 2004.
 
78.    M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh, A. A.  Shayegani, “Effect of Aging on Dielectric Behavior of Outdoor Polymeric Insulators”, 8th IEEE International Conferences on Solid Dielectrics, Toulouse, France, July 5-9, 2004.
 
79.    M. Ehsani, M. Barikani, “Properties of Urethane Alkyd Polymers”, International Symposium on Polymer Science & TechnologyTehran, Iran, 3-5 November, 1997.