Salehi-Mobarakeh, Hamid

Home Page > Upper Linsk > academic staffs > Salehi-Mobarakeh, Hamid 
CURRICULUM  VITAE


Hamid Salehi-Mobarakeh






PERSONAL INFORMATION:
NAME: Hamid Salehi-Mobarakeh
DATE OF BIRTH: March 25, 1961
E.mail: h.salehi@ippi.ac.ir

 
EDUCATION:
BS studied: 1979-1986 studied in Tehran University, Department of Chemistry, received a B.Sc. degree of Pure Chemistry in 1986.
MS studied: 1986-1990 completed a post-graduate course at Tehran University at same department, held a M.Sc. degree of Organic Chemistry.
Training: 1991 learning French as second language in University of Toulon, France
Ph.D studied: 1992-1997 Studied in Laval University, Department of Chemistry, CERSIM, received Ph.D degree of polymer Chemistry and Engineering.
 
WORKED AND RESEARCH EXPERIENCE:

  1. Analysis and characterization of polymeric materials
  2. Preparation of crystal melamine from Urea in pilot plant scale, Iran Polymer institute (IPPI).
  3. Synthesis of melamine- formaldehyde resin as glazer IPPI.
  4. Emulsion polymerization under pressure (Vinyl acetate-Ethylene, Vinyl acetate-Vinyl chloride) IPPI.
  5. Regeneration of silica gel used in air dryers in power plants.

 
Publications

Author or Co-Author

  1. Sioplas Crosslinking of PE: the effect of EVA in properties of XLPE, Iranian Journal of Polymer Science and Technology, 5,281-286, 2001.
  2. Sioplas Crosslinking of PE: Study of effect of alumina trihydrate and antimony trioxide on properties of XLPE, Iranian Journal of Polymer Science and Technology, 15, 381-388, 2002.
  3. Synthesis of vinyl acetate-ethylene copolymer through batch emulsion polymerization, I: effect of pressure, Iranian Journal of Polymer Science and Technology, 3, 165-173, 2003.
  4. Synthesis of vinyl acetate-ethylene copolymer through batch emulsion polymerization, II: Effect of buffer and emulsifier concentration, IranianJournal of Polymer Science and Technology, 16, 321-329, 2003.
  5. Synthesis of vinyl acetate copolymer through batch emulsion polymerization, Iranian  Journal of Polymer Science and Technology, 16, 257-263, 2003.
  6. Synthesis of vinyl acetate-ethylene copolymer through batch emulsion polymerization III: effect of scale up and heat generation comparison, Iranian Journal of Polymer Science and Technology, 17, 175-184, 2004.
  7. The effect of Aqueous/organic phase ratio and type of initiator on emulsion polymerization of vinyl acetate-ethylene copolymer, Iranian Journal of Polymer Science and Technology, 18, 249-256, 2005.
  8. Investigating and comparing the type and the effect of alcohol and catalyst in the hydrolysis of ethylene-vinyl acetate copolymer by FTIR spectroscopy, Iranian  Journal of Polymer Science and Technology, 19, 67-76, 2006.
  9. Study of ethylene/vinyl acetate transformation to ethylene/ vinyl alcohol copolymer by NMR and DSC, Iranian Journal of Polymer Science and Technology, 20, 399-406, 2007.
  10.  Effect of different parameters in emulsion copolymerization of vinyl acetate-ethylene in 7.5 liter high pressure reactor, Iran. Polym. J., 14, 579-587, 2005.
  11. Effect of different parameters in emulsion copolymerization of vinyl chloride/vinyl acetate, Iran. Polym. J., 15, 111-119, 2006.
  12. Study of vinyl acetate partitioning in emulsion copolymerization of vinyl chloride-vinyl acetate by FTIR and HNMR spectroscopy, J. Polym. Res., 13, 421-426, 2006.
  13. Gas phase copolymerization of ethylene and 1-butene with prepolymerized MgCl2 supported Ziegler-Natta catalyst: effect of Al/Ti ratio, Iran. Polym. J., 15, 569-575, 2006.
  14. Kevlar and glass fiber treatment for thermoplastic composites by step polycondensation, Polymer Composites, 28, 278-286, 2007.
  15. Nanocomposite particles core-shell morphology I. preparation and characterization of Fe3O4-poly(butyl acrylate-styrene) particles miniemulsion polymerization, J. Appl. Poly. Sci., 110, 1242-1249, 2007.
  16. Nanocomposite particles with core-shell morphology II. An investigation into the affecting parameters on preparation of Fe3O4-poly(butyl acrylate-styrene) particles via miniemulsion polymerization, Eur. Polym. J., 44, 2482-2488, 2008.
  17. The effect of temperature on tacticity for bulk thermal polymerization of styrene, e-Polymers, no.041, 2008.
  18. Study of tacticity and thermal rearrangement of low molecular weight 1, 2- polybutadiene by NMR, e-Polymers no.118, 2008.
  19. NMR Study of Grafting Polystyrene on Low Molecular Weight Polybutadiene in Thermal Polymerization, Iran. Polym. J., 17, 379-388, 2008.

 
Seminars and Conferences:

  1. Synthesis of Vinyl chloride-Vinyl acetate Copolymer through Batch Emulsion Polymerization. (ISPST 2003)
  2. Study of Melamine-Formaldehyde Resin Synthesis and Curing by Fourier Transformed Infrared Spectroscopy FTIR. (ISPST 2003)
  3. Study of Heat Removal in Emulsion Polymerization of Vinyl acetate-Ethylene. (ISPST 2003)
  4. The effect of EVA on Properties of Silane-Crosslinked Polyethylene. (ISPST 2003)
  5. Investigation of initiator concentration on heat generation trend in emulsion polymerization of vinyl acetate-ethylene in 7.5 L pressurized reactor. (8th National Iranian Chemical Engineering Congress 2003)
  6. Investigation of effective parameters on radiation grafting of methyl styrene on poly vinyl pyrollidone by ¡-ray. (8th National Iranian Chemical Engineering Congress 2003)
  7. Investigation of pressure effect on solubility and partitioning of ethylene in emulsion copolymerization of vinyl acetate-ethylene in 1.5 L pressured reactor. (8th National Iranian Chemical Engineering Congress, 2003)
  8. Investigation of heat generation in emulsion copolymerization of vinyl acetate-ethylene through scale-up from 1.5 to 7.5 L reactor. (8th National Iranian Chemical Engineering Congress, 2003)
  9. High performance engineering polymers.1st national seminar in Polymerization and Improvement of Polymer Properties. (PIPP 2005)
  10. The study kinetics of radical polymerization of 2-hydroxypropyl methacrylate (2-HPMA) with azobisizobutyronitrile (AIBN) and benzoyl proxide (BPO) in toluene by UV spectrophtometery. (ISPST 2005)
  11. Preparation of poly (vinyl acetate) redispersible powder. (ISPST 2005)
  12. GPC and viscosity measurements of VAE copolymers. (ISPST 2005)
  13. Study of polystyrene tacticity for radical polymerization by 13C-NMR. (ISPST 2007)
  14. Effect of surfactant type and concentration on surface migration and adhesion of MMA-BA latex films. (ISPST 2007)
  15. Encapsulation of magnetite nanoparticles by styrene-butyl acrylate copolymer through chemical initiator- free miniemulsiom polymerization. (ISPST 2007)
  16. Effect of Al/Ti ratio in gas phase copolymerization of ethylene/1-butene using triisobutyl aluminum co-catalyst. (ISPST 2007)

 
Students supervised/co-supervized:

  1. Optimization of Silane Grafting of PE in a Single-Screw Extruder and Studying  the Effects of EVA, Sb2O3 and Al(OH)3 on Properties of Prepared XLPE, H. AZIZI, MSc., March 2001.
  2. Optimization of emulsion copolymerization of Vinyl acetate-Ethylene, Mohammad Reza Rostami, MSc., September 2002.
  3. Synthesis and characterization of vinyl chloride-vinyl acetate copolymer through batch emulsion polymerization, Mostafa Hassannia, M.Sc., December 2003.
  4. Synthesis of ethylene-vinyl acetate-vinyl alcohol terpolymer by ethylene-vinyl acetate copolymer hydrolysis and characterization of the product, M.Sc., Amir Hossein Sattarie Wafaie, June 2005.
  5. Preparation and characterization of core-shell nanocomposite particles through encapsulation of magnetite and silica via miniemulsion and emulsion polymerization, Mohsen Ashjari, M.Sc., February 2007.
  6. Preparation and characterization of magnetite and styrene-butylacrylate nanocomposite particles through core-shell encapsulation of via minismulsion polymerization and investigation of dependent parameters, Sayed Yaser sehri, M.Sc., August 2007.
  7. Investigation of the effect of cocatalyst types on the preparation of LLDPE, Mohsen Firouzi Monfared, M.Sc., August 2006.
  8. Microstructure investigation of thermal polymerization in HIPS, Farshid Ziaee, Ph.D., June 2008.

 
Courses Taught
B.Sc.
            Basic polymer chemistry .
            Chemistry and technology of polymers.
M.Sc.
 Kinetics of polymerization I.
            Technology of paint and resins.
Ph.D.
New methods of polymer modification