Curriculum Vitae
![]() Jalal Barzin
(Ph.D., M.Sc., B.Sc.)
Full Professor
Biomaterials Department, Polymer Science Faculty
Biomaterials (M.Sc.) New application of polymeric materials (M.Sc.) Polymer surface modification (Ph.D.) Biocompatibility in nano scale (Ph.D.) Mathematics for chemical engineering (B.Sc.)
C. Research Interests: Biomaterials and Tissue engineering
D. Journal Papers:
11) Zare M., Mobedi H., Barzin J., Mivehchi H., Jamshidi A., Mashayekhi R., Effect of Additives on Release Profile of Leuprolide Acetate in an In Situ Forming Controlled-Release System: In Vitro Study, Journal of Applied Polymer Science, 2008, 3781-3787.
13) Astaneh R., Erfan M, Barzin J., Mobedi H., Moghimi HR., Effect of ethyl benzoate on performance, morphology and erosion of PLGA implants formed in situ, Advances in Polymer Technology, 2008, 17-26.
22) Mortazavi M., Mortaheb H. R., Barzin J., Mokhtarani B., Salehi Shahrabi S., Pervaporative Desulfurization of Thiophene/n- heptane by a composite membrane of PEG/PVP Blend on PES, World academy of science, engineering and technology, 2011, 202-206.
23) Esmaeili M., Madaeni S. S., Barzin J., Morphological dependency of polymer electrolyte membranes on transient salt type: effets of anion species, Polymer International, 2011, 362-370.
24) Pazokian H, Jelvani S, Barzin J, Mollabashi M, Abolhosseini S, Effect of spot size on cone formation in a XeCl laser ablation of polyethersulfone films, Optics Communications, 2011, 363-367.
26) H. Pazokian, M. Mollavashi, S. Jelvani, J. Barzin, SH. Abolhoseini, Etching of a polythersulfone film using a XeCl laser, Optical Engineering ,2011, 50, 84301-4.
30) H. Pazokian, A. Selimis, J. Barzin, S. Jelvani, M. Mollabashi, C. Fotakis, E. Stratakis, Tailoring the wetting properties of polymers from highly hydrophilic to superhydrophobic using UV laser pulses, Journal of Micromechanics and Microengineering, 2012, 22.
36) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A. Zarghan, Adsorption of copper and nickel ions on macroporous chitosan membrane: Equilibrium study, Applied Surface Science, 2012, 258, 7732–7743.
38) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, Laser Surface Modification of Polyethersulfone Films: Effect of Laser Wavelength on Biocompatibility, Journal of physics, 2013, 414.
39) S. S. Madaeni, M. Esmaeili, S. Attar Nosrati, J. Barzin, Preparation and Characterization of PES and PA Composite Membranes for Air Separation at Low Pressures, Intern. Polymer Processing, 2013, 28, 281–290. 40) M. Esmaeili, S. S. Madaeni, J. Barzin, Morphology and Gas-Permeation Analyses for Poly(ether sulfone) / Poly(vinyl alcohol) Electrolyte Composite Membranes in theFacilitated Transport Process, Journal of Applied Polymer Science, 2013, 129, 1569–1585.
44) M. Naeimi, A. Karkhaneh, J. Barzin, M. T. Khorasani, A. Ghaffarieh, Novel PDMS-based Membranes: Sodium Chloride and Glucose Permeability, Journal of Applied Polymer Science, 2013, 127, 3940-3947.
45) H. Pazokian, S. Jelvani, M. Mollabashi, J. Barzin, Review of the biocompatibility and blood compatibility properties of polyethersulfone film modified by the excimer and CO2 lasers, Laser Physics, 2014, 24, 066001.
47) M. Mortazavi, H.R. Mortaheb, J. Barzin Separation of thiophene from thiophene/n-heptane mixture by using composite membranes with active layer of PVP/PEG on PES support membrane, Journal of Applied Research in Chemistry (JARC),2014, 14.
48) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, S. Abolhoseini, Formation of different microstructures on a polyethersulfone film following XeCl laser irradiation, Iranian Journal of Physics Research (IJPR), 2014, 14.
49) M. Amini-Fazl, H. Mobedi, J. Barzin, Investigation of aqueous stability of taxol in different release media, Drug Development and Industrial Pharmacy, 2014, 40, 519–526.
50) Ranjbarzadeh-Dibazar, A., Shokrollahi, P., Barzin, J., Rahimi, A., Lubricant facilitated thermo-mechanical stretching of PTFE and morphology of the resulting membranes, Journal of Membrane Science, 2014, 470, 458-469.
51) Ghanian, M. H., Barzin, J., Zandi, M.Ehsani .M, Kazemi‐Ashtiani, M., Controlling the orientation of electrospun nanofibes by conductive-insulating hybrid collectors, Basparesh Journal( Persian Language), 2014, 4,2, 51-58.
52) Mota, A., Lotfi, A. S., Barzin, J., Hatam, M., Adibi, B., Khalaj, Z., Massumi, M., Human bone marrow mesenchymal stem cell behaviors on PCL/gelatin nanofibrous scaffolds modified with a collagen IV-derived RGD-containing peptide, Cell Journal (Yakhteh), 2014, 16, 1.
53) Saeed, M., Mirzadeh, H., Zandi, M., Irani, S., Barzin, J., Rationalization of specific structure formation in electrospinning process: Study on nano‐fibrous PCL‐and PLGA‐based scaffolds, Journal of Biomedical Materials Research Part A, 2015, 103, 3927-3939.
54) Jafarinasab, M., Barzin, J., Mortaheb, H. R., Mobedi, H., Structure and performance characterization of PDMS/PES-based pervaporation membranes for ethanol/water separation, Iranian Polymer Journal, 2015, 24, 989-1002.
55) S. khezli, M. Zandi, J. Barzin, A review on Poly (ether-sulfone) electrospun nanofibers for membrane separation process, Basparesh Journal (Persian Language), 2015, 4, 4-15.
56) Ghanian, M. H., Farzaneh, Z., Barzin, J., Zandi, M., Kazemi‐Ashtiani, M., Alikhani, M., Baharvand, H., Nanotopographical control of human embryonic stem cell differentiation into definitive endoderm, Journal of Biomedical Materials Research Part A, 2015, 103, 3539-3553.
57) Jafari‐Nodoushan, M., Barzin, J., Mobedi, H., Size and morphology controlling of PLGA microparticles produced by electro hydrodynamic atomization, Polymers for Advanced Technologies, 2015, 26, 502-513.
58) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin,S. Abolhoseini , XeCl laser treatment of polyethersulfone membrane in the air and water, Iranian Journal of Physics Research (IJPR), 2015,594.
59) S. Khezli, M. Zandi, J. Barzin, Fabrication of electrospun nanocomposite polyethersulfone membrane for microfiltration, Polymer Bulletin, 2016, 73, 2265–2286.
60) Ghaee, A., Shariaty-Niassar, M., Barzin, J., Matsuura, T., Fauzi Ismail, A., Preparation of chitosan/cellulose acetate composite nanofiltration membrane for wastewater treatment, Desalination and Water Treatment, 2016, 57, 14453-14460.
61) Taghavi, S., Mohammadi, F., Barzin, J., Ionic Polymer-Metal Composites (IPMC) from recycled Flemion® membrane used in chlor-alkali industry, Scientia Iranica. Transaction C, Chemistry, Chemical Engineering, 2016, 23(3), 1117.
62) M. Kazemi Ashtiani, M. Zandi, J. Barzin, Y. Tahamtani, M. Hossein Ghanian, A. Moradmand, M. Ehsani, Substrate-mediated commitment of human embryonic stem cells for hepati differentiation, Journal of Biomedical Materials Research Part A, 2016,104A,2861-2872.
63) Vahedi M., Barzin J., Kowsari M., Fabrication of polyethersulfone-Based symmetric Membrane by Applying pause stage in coagulation, Iran. J. Polym. Sci. Technol, 2016, 28(5), 421-436,.
64) Pazokian, H., Mehrabadi, A. H., Barzin, J., Mollabashi, M., Controlling the porosity of a polyethersulfone membrane surface with an XeCl laser, Laser Physics, 2016, 26(3).
65) Jafari-Nodoushan, M., Barzin, J., Mobedi, H., A stability-indicating HPLC method for simultaneous determination of morphine and naltrexone, Journal of Chromatography B, 2016, 1011, 163-170.
66) Faramarzi, A. R., Barzin, J., Mobedi, H., Effect of solution and apparatus parameters on the morphology and size of electrosprayed PLGA microparticles, Fibers and Polymers, 2016, 17(11), 1806-1819.
67) Khorsand-Ghayeni, M., Barzin, J., Zandi, M., Kowsari, M., Fabrication of asymmetric and symmetric membranes based on PES/PEG/DMAc, Polymer Bulletin, 2017, 74(6), 2081-2097.
68) L. Mohammadi Amirabad, M. Massumi, M. Shamsara, I. Shabani, A. Amari, M. Mossahebi Mohammadi, S.Hosseinzadeh, S. Vakilian, S. K. Steinbach, M. R. Khorramizadeh, M. Soleimani, J. Barzin, Enhanced Cardiac Differentiation of Human Cardiovascular Disease Patient-Specific Induced Pluripotent Stem Cells by Applying Unidirectional Electrical Pulses Using Aligned Electroactive Nanofibrous Scaffolds, ACS Appl. Mater. Interfaces, 2017, 9, 6849-6864.
69) Saeed, S. M., Mirzadeh, H., Zandi, M., Barzin, J., Designing and fabrication of curcumin loaded PCL/PVA multi-layer nanofibrous electrospun structures as active wound dressing, Progress in biomaterials, 2017, 6(1-2), 39-48.
70) Faramarzi, A. R., Barzin, J., Mobedi, H., Producing PLGA fine particles containing high magnetite nanoparticles by using the electrospray technique, Journal of Polymer Research, 2017, 24(1), 13.
71) Alavijeh, R. Z., Shokrollahi, P., Barzin, J., A thermally and water activated shape memory gelatin physical hydrogel, with a gel point above the physiological temperature, for biomedical applications, Journal of Materials Chemistry B, 2017, 5(12), 2302-2314.
72) Alavijeh, R. Z., Shokrollahi, P., Barzin, J. (2017). A thermally and water activated shape memory gelatin physical hydrogel, with a gel point above the physiological temperature, for biomedical applications. Journal of Materials Chemistry B, 5(12), 2302-2314.
73) Ranjbarzadeh-Dibazar, A., Barzin, J., Shokrollahi, P., Microstructure crystalline domains disorder critically controls formation of nano-porous/long fibrillar morphology of ePTFE membranes, Polymer, 2017, 121, 75-87.
74) Shahrabi, S. S., Mortaheb, H. R., Barzin, J., Ehsani, M. R., Nanoporous Polyether Sulfone Membrane, Preparation and Characterization: Effect of Porosity and Mean Pore Size on Performance, Journal of Membrane and Separation Technology, 2017, 6(2), 71-84.
75) Y. Hamedani,N. Fazeli,J. Barzin, Production and Characterization of Gelatin Based Electro-spun Nano-fibres as Burn Wound Dressings, Iranian Journal of Chemical Engineering (IJCHE), 2017, 14, 3.
76) A. R. Faramarzi , J. Barzin, H. Mobedi, Iron Oxide Loaded PLGA Particles for Contrast Enhancement in Magnetic Resonance Imaging (MRI), Global Journal of Pharmacy & pharmaceutical Science, 2017,2.
77) S. E. Maleki, P. Shokrollahi, J. Barzin, Impact of supramolecular interactions on swelling and release behavior of UPy functionalized HEMA‐based hydrogels, Polymers for Advanced Technologies, 2018.
78) Shahrabi, S. S., Barzin, J., Shokrollahi, P., Blood cell separation by novel PET/PVP blend electrospun membranes, Polymer Testing, 2018, 66, 94-104.
79) Vahedi, M., Barzin, J., Shokrolahi, F., Shokrollahi, P., Self‐Healing, Injectable Gelatin Hydrogels Cross‐Linked by Dynamic Schiff Base Linkages Support Cell Adhesion and Sustained Release of Antibacterial Drugs, Macromolecular Materials and Engineering, 2018, 1800200.
80) Barzin, J., Safarpour, M., Kordkatooli, Z., Vahedi, M., Improved microfiltration and bacteria removal performance of polyethersulfone membranes prepared by modified vapor‐induced phase separation, Polymers for Advanced Technologies, 2018,1-20
81) M. A. Aroon, H. Beheshti, J. Barzin, M. Shariaty-Niassar, Purified and Functionalized MWCNTs: Application in CO2/CH4 Separation Using Mixed Matrix Membranes, International Journal of Nanoscience & Nanotechnology, 2018, 14, 251.
82) S. Salehi Shahrabi, J. Barzin, P. Shokrollahi, Statistical approach to estimate fiber diameter of PET/PVP blend electrospun using Taguchi method and fitting regression model, Materials Research Express, 2019,6.
83) M. Safarpour, J. Barzin, A. Khataee, and Z. Kordkatooli, Two‐stage phase separation of cellulose acetate membranes modified with plasma‐treated natural zeolite: Response surface modeling, Polymers for Advanced Technologies, 2019.
84) S. Karimi, A. Ghaee, J. Barzin, Preparation and characterization of a piezoelectric poly (vinylidene fluoride)/nanohydroxyapatite scaffold capable of naproxen delivery, European Polymer Journal, 2019, 112, 442-451.
85) R. Dehghan and J. Barzin, Development of a polysulfone membrane with explicit characteristics for separation of low density lipoprotein from blood plasma, Polymer Testing, 2020, 85, 106438.
86) M. Vahedi, F. Shokrolahi, J. Barzin, P. Shokrollahi,L. Taghiyar,M. Kazemi Ashtiani, Amylopectin Multiple Aldehyde Crosslinked Hydrogel as an Injectable and Self-Healing Cell Carrier for Bone Tissue Engineering , Macromolecular Materials and Engineering, 2020,305,4.
87) M. Zakeri,H. Mobedi,J. Barzin,A. Jamshidi,A. Mashak, Development of chitosan beads for controlled release of dexamethasone prepared by co-axial needle method, Journal of Polymer Research, 2020, 27, 254.
88) M. Moghiseh, M. Safarpour, J. Barzin, Cellulose acetate membranes fabricated by a combined vapor-induced/wet phase separation method: morphology and performance evaluation, Iranian Polymer Journal, 2020, 29, 1026.
89) S. Hasheminasab, J. Barzin, R. Dehghan., High-Performance Hemodialysis Membrane: Influence of Polyethylene Glycol ans Polyvinylpyrrolidone in the Polyethersulfone Membrane, Journal of Membrane Science and Research, 2020, 6, 438.
90) Mahdi Saeed,Hamid Mirzadeh,Mojgan Zandi, Jalal Barzin , PEGylated curcumin‑loaded nanofibrous mats with controlled burst release through bead knot‑on‑spring design, Progress in Biomaterials, 2020, 9, 175.
91) F. Haghdoost,S. Hajir Bahrami,J. Barzin,A. Ghaee, Preparation and characterization of electrospun polyethersulfone/polyvinylpyrrolidone-zeolite core–shell composite nanofibers for creatinine adsorption, Separation and Purification Technology, 2021, 257,117881.
92) R.Dehghan, J.Barzin, Low density lipoprotein (LDL) apheresis from blood plasma via anti-biofouling tuned membrane incorporated with grapheme oxide- modified carrageenan, Journal of Membrane Science, 2021, 620, 118878.
93) R.Dehghan, J.Barzin, High cut‑off membrane: evaluation of pore collapse and the synergistic effect of low and high molecular weight polyvinylpyrrolidone, Journal of Polymer Research, 2021, 28.
94) R.Dehghan, J.Barzin, Membrane patterning through horizontally aligned microchannels developed by sulfated chopped carbon fiber for facile permeability of blood plasma components in low-density lipoprotein apheresis, Separation and Purification Technology, 2022, 278.
95) M. Mohseni, P. Shokrollahi and J.Barzin, Impact of supramolecular interactions on delivery of dexamethasone from a physical network of gelatin/ZnHAp composite scaffold, International Journal of Pharmaceutics, 2022, 615.
96) R.Dehghan, J.Barzin, H.Abtahian, B Darabi, H.R. Ghaderi, PES membranes for Low density lipoprotein (LDL) apheresis from blood, Research and Development of Polymer Technology Journal ( Persian language) , 2022, 7,1, 53-63.
97) A.Afroozan M.Akbari and J.Barzin, Development of an injectable self‑healing hydrogel based on N‑succinyl chitosan/ oxidized pectin for biomedical applications, Journal of Polymer Research, 2022, 29,165.
98) F. Haghdoost, M. Razbin, H. Bahrami, J.Barzin and A. Ghaee, Modeling and optimization of the core-shell nanofibrous composite mat as a scaffold via hybrid models, Industrial Textiles, 2022, 52, 1-28.
99) R.Dehghan, J.Barzin, H.Abtahian, B Darabi, H.R. Ghaderi, Study on blood coagulation on biopolymers and an overview of the methods of measuring compatibility, Research and Development of Polymer Technology Journal ( Persian language) , 2023, 7,4,5-16. 100) F. Haghdoost,H. Bahrami, J.Barzin and A. Ghaee, Development of biocompatible co-electrospun polyethersulfone/polyvinylpyrrolidone-Y zeolite hybrid nanofiber, International Journal of Polymeric Materials and Polymeric Biomaterials, 2023, 72,18,1546-1557.
E. Conference Papers:
1) J. Barzin., S. S. Madaeni, H. Mirzadeh., Effect of Polyvinylpyrrolidone (PVP) on Hemodialysis Performance of Flat membranes Prepared from Polyether Sulfone (PES), 7th Iranian Chemical Engineering Congress (IChEC 2002), October 27-29, Tehran University, Tehran, Iran.
5) S. S. Madaeni., A. Rahimpour., J. Barzin, Effect of acetone on morphology and performance of polysulfone ultrafiltration membranes for milk concentration, 9th Iranian Chemical Engineering Congress (IChEC 2004), November 23-25, Tehran, Iran.
20) A. Mota, A. S. Lotfi, J. Barzin, M. Maasumi, M. Hatam, B. Adibi, Z. Khalaj, RGD Modified PCL/Gelatin Hybrid Nanofiber for Potential Applications in Tissue Engineering, 8th Royan International Congress on Stem Cell Biology & Technology, 5-7 September 2007, Tehran, Iran.
21) A. Abarghooee., J. Barzin., A. Jamshidi, M.T. Khorasani, Surface Modification of PES Hemodialysis Membrane for Reduction of Protein Fouling and Platelet Adhesion by Plasma, 14th Iranian conference on biomedical engineering (ICBME 2008), Feb 13-14, Shahed University, Tehran, Iran.
44) A. Haghighat Mesbahi, D. Semnani, J. Barzin, H. Mobedi, Investigating Expert system parameters on modeling performance of in situ forming controlled Drug Delivery system, Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.
45) A. Haghighat Mesbahi, S. Nouri Khorasani, J. Barzin, H. Mobedi, D. Semnani, Performance prediction of in situ forming controlled drug delivery system by Adaptive Neuro-Fuzzy Inference System (ANFIS), Asia/Australia Regional Meeting (PPS 2011), November 15-17, Kish Island, Iran.
46) M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, H. Baharvand, M. Kazemi-Ashtiani, Optimizing topographical features of electrospun nanofibers for efficient endodermal differentiation of human induced pluripotent stem cells, 10th Annual Meeting International Society for Stem Cell Research (ISSCR), June 13-16, Japan, Yokohama, PACIFICO Yokohama.
61) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, KrF and XeCl Laser Induced Ripples on a Polyethersulfone Film, XIX International Symposium on High-Power Laser Systems and Applications 2012 ISTANBUL.
62) A. Ghaee, M. Shariaty-Niassar, J. Barzin, A. Fauzi Ismail, Chitosan/Polyethersolfone Composite Nanofiltration Membrane for Removal Heavy Metal from Wastewater, The 11th International Conference on Membrane Science & Technology, Kuala Lampur, Malaysia, 27-29 Aug, 2013.
63) A. Ghaee, M. Shariaty-Niassar, J. Barzin, T. Matsuura, A. Fauzi Ismail, Synthesis and Application of Chitosan/Cellulose Acetate Coposite Membranes for Copper Ions Removal from Wastewater, The 11th International Conference on Membrane Science & Technology, Kuala Lampur, Malaysia, 27-29 Aug, 2013.
64) Sh. Tohidi, J. Barzin, A. Ghaee, Preparation and evaluations of electrospun poly (lactic-co-glycolic acid)/Chitosan composite nanofibrous for wound dressing applications, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
65) K. Khadem, J. Barzin, H. Pazokian, M. Mollabashi, K. Silakhor, Surface modification of polyethersulfone membrane by ArF lase fohydrophilicity improvement, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
66) M. Vahedi, J. Barzin, Effect of Temperature and Solvent Evaporation Delay Time on the Structure of PES Flat Sheet Membrane, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
67) R. sadat Eshraghi Naeeni, G. Amoabediny, A. Ghaee, J. Barzin, Effect of polyethylene glycol concentration as an additive on performance of polyether sulfone dialysis membranes, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
68) M. Jafarinasab, J. Barzin, H. Mobedi, H. Mortaheb, G. Salehi Jouzani, S. abbasalizadeh, Effect of Surface Nodular Structure on the PDMS/PES based Membranes Pervaporative Performances in Ethanol / Water Separation, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
69) B. Sadatnia, F. Mohammadi, J. Barzin, Preparation and characterization of PPO/ZIF-8mixed matrix membranes for propylene/propane separations, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
70) S. khezli, M. Zandi, J. Barzin, Effect of solvent system and environmental conditions on the electro spinning of Poly(ether-sulfone), 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
71) Y. Hamedani, N. Fazeli, J. Barzin, Investigation of Electro-spun PLGA/Lidocaine fibers, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
72) Y. Hamedani, J. Barzin, N. Fazeli, Investigation of drug release in sandwich structured PLGA-Lidocain/Gelatin-SSD/PLGA electro-spun fibers, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
73) A. Ranjbarzadeh Dibazar, P. Shokrollahi, A. Rahimi, J. Barzin, An investigation on Shrinkability of ePTFE Membrane Through Uniaxial Stretching, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute (IPPI).
74) M. Jafari-Nodoushan, J. Barzin, H. Mobedi, Microsphere Embedded Matrix: a New Method for Drug Co-Therapy, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
75) M. Khorsand, J. Barzin, M. Zand, Achieve to Asymmetric Polyethersulfone (PES) Membrane by Combined Phase Separation Method, 11th International Seminar on Polymer Science and Technology (ISPST 2014) , Iran Polymer and Petrochemical Institute (IPPI).
76) A. Hashemipanah, H. Pazokian, M. Mollabashi, J. Barzin, A. Tabatabaei, XeCl Laser Irradiation of PES/PVP Membranes, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
77) K Khadem, H. Pazokian, J. Barzin, M. Mollabashi, A. Tabatabaei, Study of surface and volume porosity of PES membranes with ArF Laser treatment, 3rd Confrance on Lasers and their applications, 3-4 September (2014), Tehran, Iran.
78) A. Hashemipanah, H. Pazokian, M. Mollabashi, J. Barzin, A. Tabatabaei, K Khadem, Effect of XeCl Laser on surface chemical structure of PES base Membranes, 3rd Confrance on Lasers and their applications, 3-4 September (2014), Tehran, Iran.
79) K Khadem, J. Barzin, M. Mollabashi, H. Pazokian, K. Silakhory, Effect of ArF laser on hydrophilisity of PES membranes, 3rd Confrance on Lasers and their applications, 3-4 September (2014), Tehran, Iran.
80) F. Banihashemi, H. Mobedi, J. Barzin, Investigation of effect of various drug loading and addition of a rate modifying agent on famotidine release from in situ forming implants, 11th International Seminar on Polymer Science and Technology (ISPST 2014), Iran Polymer and Petrochemical Institute (IPPI).
81) M. Jafari-Nodoushan, H. Mobedi, J. Barzin, Electrospraying: A Tuneable Method of Microparticle Production, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society Conference (ICRC 2014) February 2014
82) M. Jafari-Nodoushan, J. Barzin, H. Mobedi, Design of a Combined Morphine Delivery System (Morphine Microsphere- Embedded In-Situ Forming), The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society Conference (ICRC 2014) February 2014.
83) M. S. Amini-Fazl, H. Mobedi, J. Barzin, H. Abedini, Incorporation of HAS Microparticles within the Taxol-Loaded In situ Forming PLGA Microspheres: Drug Release, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society Conference (ICRC 2014) February 2014. 84) Y. Hamedani, N. Fazeli, J. Barzin, Investigation of Drug Release in Gelation/Silver Sulfadiazine Electro-spun Fibers, The 1st Middle East (MECRC 2014) & The 6th Iranian Controlled Release Society Conference (ICRC 2014) February 2014.
85) M. Jafarinasab, J. Barzin, H. Mobedi, H. R. Mortaheb, G. R. Salehi Jouzani, S. Abbasalizadeh, Design of Support Layers based on PES Membrane to Improve the Permeability Performance, The 8th International Chemical Engineering Congress & Exhibition (IChEC 2014) Kish, Iran, 24-27 February. ` 86) A. Mota, S. Lotfi, J. Barzin, M. Maasumi, M. Hatam, B. Adibi, Fabrication of PCL/Gelatin Hybrid Nanofibrous Scaffold Functionalized with Collagen IV-Derived RGD Peptide, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
87) M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand, Nanofibrous Scaffolds with In Situ Pore Extension Potential, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.
88) Sh. Tohidi, A. Ghaee, J. Barzin, Electrospinning and Characterization of Chitosan Nanofibrous for Wound Dressing Application, 22nd Iranian Seminar of Organic Chemistry,19-21 August 2014, Tabriz, Iran.
89) M. Vahedi, J. Barzin, Effect of Polymer Concentration and Temperature of Delay Stage on the Structure of PES Membrane, Iran Membrane, 20-21 May 2015, Tehran, Iran.
90) A. Ranjbarzadeh, J. Barzin, P. Shokrollahi, Crystal/Morphology Correlation in the PTFE Membranes, Iran Membrane, 20-21 May 2015, Tehran, Iran.
91) A. Homavand, M. Moghiseh, J. Barzin, Effect of Solvent Type on Structure of Cellulose Acetate Membranes, Iran Membrane, 20-21 May 2015, Tehran, Iran.
92) M. Moghiseh, A. Homavand, J. Barzin, Effect of Cellulose Acetate and Polyvinylpyrrolidone Concentration on Membrane Structures, Iran Membrane, 20-21 May 2015, Tehran, Iran.
93) Sh. Tohidi, A. Ghaee, J. Barzin, Evaluations Effect of Concentration and Electrospinning Parameters on Electrospun Poly (D, L Lactic co-glycolic acid) Nanofibers, 22nd Iranian Seminar of Organic Chemistry, 19-21 August 2014, Tabriz, Iran.
94) S. M. Saeed, H. Mirzadeh, M. Zandi, J. Barzin, Preparation and Evaluation of Electrospun (Polycaprolactone/Pegylated Curcumin) Hybrid as Wound Dressing, International Conference & Exhibition on Advanced & Nano Materials (ICANM), 10-12 August 2015, Ottawa, Canada.
95) M. Khorsand, J. Barzin, M. Zandi, Porous Poly Ether Sulfone Composite Membrane with Highly Symmetric Interconnected Pores Structure, International Conference & Exhibition on Advanced & Nano Materials (ICANM), 10-12 August 2015, Ottawa, Canada.
96) H. Pazokian, M. Mollabashi, S. Jelvani, J. Barzin, Laser Surface Modication of Polyethersulfone Films: Effect of Laser Wavelength on Biocompatibility, 21st International Laser Physics Workshop Canada. (2015)
97) M. Jafari-Nodoushan, J. Barzin, H. Mobedi, Taking advantage of membranes in controlling drug initial burst release of sustained release drug delivery/microspheres, The 12th International Conference on Membrane Science and Technology MTS 2015, 1-3 November 2015. 98) Sh. Tohidi, A. Ghaee, J. Barzin, Preparation and modification of electrospined PLGA nanofibers for wound dressing application., Nanotechnology application in medicine, April 2015, Tehran, Iran.
99) B. Sadatnia, F. Mohammadi, J. Barzin, A. Ghadimi, Preparation, and characterization ofPEBA/ZIF-8mixedmatrix membranes for propylene/propane separations, The 12th International Conference on Membrane Science and Technology MTS 2015, 1-3 November 2015.
100) S. Karimi., A. Ghaee., J. Barzin., Improving the permeability of PVDF membranes by incorporating β-cyclodextrin modified silica nanoparticles, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.
101) M. Moghiseh., A. Homavand., J. Barzin., Investigation of preparation parameters on cellulose acetate membrane structures, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.
102) A. Homavand., M. Moghiseh., J. Barzin., Morphological study of cellulose acetate membranes based on hydrophilic additives, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.
103) M. Vahedi., J. Barzin., effects of delay time and relative humidity in coagulation process on the structure of PES membranes, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.
104) B. Sadatnia., F. Mohammadi., J. Barzin., Ghadimi A., preparation and characterization of PEBA/ZIF-8 mixed matrix membranes for propylene/propane separations, the 12th international conference on membrane Science and Technology MTS2015, 1-3 November 2015.
105) M. Khorsand, J. Barzin, M. Zandi, Porous Poly Ether Sulfone Composite Membrane with Highly Symmetric Interconnected Pores Structure, International Conference & Exhibition on Advanced & Nano Materials (ICANM 2015)Canada.
106) A. Faramarzi, J. Barzin, H. Mobedi, Application of fine biocompatible polymer particles including magnetic nanoparticles for M.R.I imaging, Nanomedicine in the diagnosis and treatment of incurable diseases 18-19 February 2015, Tehran, Iran.
107) S. M. Saeed, H. Mirzadeh, M. Zandi, J. Barzin., Preparation and Evaluation of Electrospun (Polycaprolactone/Pegylated Curcumin) Hybrid as Wound Dressing, International Conference & Exhibition on Advanced & Nano Materials (ICANM 2015) Ottawa, Canada.
108) A. Faramarzi, J. Barzin, H. Mobedi, Processing Parameters of Electrosprayed Fe3O4 Loaded PLGA Nanoparticles for Utilizing in M.R.I, 14th Iranian Pharmaceutical Science Congress & 1st Symposium of Biopharmaceutics and Pharmacokinetics. (2015)
109) A. R. Faramarzi, J. Barzin, H. Mobedi, Characterization of magnetic PLGA nanofibers fabricated by electrospinning technique for hyperthermia and MRI, The 2nd Iranian Nanomedicine Congress 2016 (INMC 2016).
110)A. R. Faramarzi, J. Barzin, H. Mobedi, Preparation and characterization of electrospried PLGA nanoparticles for drug delivery systems. Iran Membrane 2015,Tehran,Iran. 111) A. R. Faramarzi, J. Barzin, H. Mobedi, Size and morphology variation of electrosprayed contrast agent loaded PLGA microparticles, The 2nd Iranian Nanomedicine Congress (INMC 2016).
112) A. Faramarzi, J. Barzin, H. Mobedi, Preparation of PLGA biocompatible particles including magnetic materials for M.R.I imaging, Nanomedicine in the diagnosis and treatment of incurable diseases 18-19 February 2015, Tehran, Iran.
113) A. Ranjbarzadeh-Dibazar, J. Barzin, P. Shokrolahi, Expanded PTFE membrane preparation for vascular prosthesis, XLIII Annual Congress of the European Society for Artificial Organs (ESAO2016),Warsa, Poland.
114) M. Mohseni Moghaddam, P. Shokrollahi, J. Barzin, Synthesis of nZnHApUPy for bone tissue engineering applications, XLIII Annual Congress of the European Society for Artificial Organs (ESAO2016), Warsa, Poland.
115) S. Maleki Esfandabadi, P. Shokrollahi, J. Barzin, Synthesis of a supramolecular hema hydrogel, XLIII Annual Congress of the European Society for Artificial Organs, (ESAO2016), Warsa, Poland.
116) M. Mohseni, P. Shokrollahi, J. Barzin, Synthesis and characterization of nZnHApUPy for bone tissue engineering applications, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
117) R. Zamani, P. Shokrollahi, J. Barzin, The effect of solvents system, medium cooling, syringe heating on electrospinning of supramolecular polycaprolactone, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
118) M. Vahedi, J. Barzin, F. Shokrolahi, P. Shokrollahi, Synthesis of Chitosan-Based Hydrogel with Simply Mixing Preparation Approach, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
119) A. Ranjbarzadeh, J. Barzin, P. Shokrollahi, Expanded PTFE Design for Guided Bone Regeneration Membranes, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
120) B. Sadatnia, J. Barzin, A. Soroush, Evaluating the role of thermodynamic and kinetic properties on the morphology of membranes prepared from water/DMAc/PES/PVP, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
121) B. Sadatnia, F. Mohammadi, J. Barzin, Poly (2,6-dimethyl-1,4-phenylene oxide)/zeolitic imidazolite framework-8 mixed matrix membranes for olefin/paraffin separations, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
122) S. Salehishahrabi, J. Barzin, P. shokrollahi, Effect of processing condition and polymer concentration on manufacturing of PET/ PVP fibrous membrane, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
123) A. R. Faramarzi, J. Barzin, H. Mobedi, Size and Morphology of Surfactant Capped Iron Oxide Nanoparticles Loaded in PLGA Fine Particles by Electrospraying, 12th International Seminar on Polymer Science and Technology (ISPST 2016).
124) A. R. Faramarzi, J. Barzin, H. Mobedi, Morphological Study of Magnetic Fibrous PLGA Biocomposites Produced by Electrospinning, The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5).
125) R. Dehghan, J. Barzin, Z. Kordkatooli, S. Mahdavi, Effect of Relative Energy Difference (RED) of coagulation bath on the structure of polysulfone membrane, 13th International Seminar on Polymer Science and Technology (ISPST 2018), Tehran, Iran.
126) R. Dehghan, J. Barzin, Simultaneous effect of low and high molecular weight of polyvinylpyrrolidone on the polysulfone ultrafiltration, The 16th Iranian National Congress of Chemical Engineering, Tehran, 2019.
127) Sh. Mahdavi, J. Barzin, M. Safarpour, Investigating the structure of polysulfone/polyvinyl pyrrolidone membrane by changing the phase separation process induced by nonsolvent, The 16th Iranian National Congress of Chemical Engineering, 2019, Tehran, Iran
128) F. Haghdoost, S. Hajir Bahrami, J. Barzin, A. Ghaee, preparation of flexible zeolite nanocomposite fibers by electrospining process, 14th International Seminar on Polymer Science and Technology (ISPST 2020), Tehran, Iran.
129) M. shojaipour, M. Ghaemy, J. barzin, S.M. Amininasab, M. Vahedi. Hydrogel base on chitosan recyclable ion exchanger for efficient removal of chromate and nitrate from water: Synthesis, characterization and application in membrane, 14th International Seminar on Polymer Science and Technology (ISPST 2020), Tehran, Iran.
F. Iran Patents:
1) J. Barzin, S. S. Madaeni, H. Mirzadeh (2005).Design and Preparation of lab-scale Polyether Sulfone Flat sheet Membranes for Hemodialysis process.No: 32720. 2) J. Barzin, S. S. Madaeni, H. Mirzadeh (2005).Design and Preparation of lab-scale Polyether Sulfone Hollow fiber Membranes for Hemodialysis process.No 32721. 3) S. S. Madaeni, M. Esmaili, J. Barzin (2007).Manufacturing and evaluating the asymmetric and composite polyamide membranes based polyethersulphone for air separation at low pressures, No 38688. 4) S. S. Madaeni, M. Esmaili, J. Barzin (2007).Manufacturing of composite membranes based polyethersulphone via immersion coating procedure for air separation at low pressures. No 38689. 5) J. Barzin, H. Mirzadeh, S. S. Madaeni (2007).Introduce and identification of flat sheet membrane defects and removing methods. No 38745. 6) J. Barzin, H. Mirzadeh, S. S. Madaeni (2007).A novel method for reduction of platelet adhesion on hemodialysis membranes for high performance application. Iran Patent, No 38746. 7) J. Barzin, H. Mirzadeh, S. S. Madaeni (2007).Preparation and Modification of Polyether Sulfone Hollow fiber Hemodialysis Membranes for high performance. No 38747. 8) J. Barzin, H. Mahdavi, M. Kermani (2008). Design and manufacture of automatic machine for hollow fiber collection. No 52655. 9) J. Barzin, H. Mahdavi, M. Kermani (2008).Design and manufacture of spinneret die for hollow fiber production. No 52656. 10) J. Barzin, H. Mahdavi, M. Kermani (2008).Design and manufacture of sorting machine for hollow fiber production. No 52657. 11) M. Naeimi seresht, A. Karkhaneh, J. Barzin (2010).Preparation of PDMS membrane for NaCl difiusion.No 67620 12) H. Farokhzad, H. Mobedi, J. Barzin, A. Poorkhalil (2010).Preparaton of dental in situe nanocomposite drag delivery system (In vitro study) No 65351. 13) J. Barzin, A. Ranjbarzadeh, P. Shokrollahi, A. Rahimi (2017).Fabrication and characterization of PTFE membrane by use of oligomeric plastisizer with the boiling and degradation temperature upper than 150℃, Iran Patent, No 91043. 14) J. Barzin, H. Mirzadeh, M. zandi, S. M. Saeid (2016).Preparation of threelayer curcumin loaded wound healing by use of electrospray methods, No 88710. 15) J. Barzin, M.Kowsari, M.Vahedi, (2016).Preparation of symmetric and asymmetric membranes and mixed structure. No; 89361 16) J. Barzin, M. Jaafari-Nadoushan, H. Moubedi (2017). Micro particles production devise by electrostatic sputtering, No 92792. 17) J. Barzin, H. Mobedi, A.Faramarzi, Preparation of PLGA fine particles including paramagnetic nano particles coated by oleic acid with electrospray method. No: 98922. 18) M.Vahedi, F.Shokrollahi, J. Barzin, P.Shokrollahi, Preparation of injectable and self-healing hudrogelbased on natural polymer. No: 99704. 19) P.Shokrollahi, J. Barzin, A.Ranjbarzadeh, Making all instruments for producing artificial vascular based on PTFE. No: 104721
G. Books:
3) Faramarzi, A. R., J. Barzin., Mobedi, H., Gorji, M. Polymeric pharmaceutical nanoparticles developed by electrospray (Chapter 6). "Nanostructures for Novel Therapy .Synthesis, Characterization and Applications" Elsevier, 2017.
4) Jafari-Nodoushan, M., Mobedi, H., J. Barzin. Encapsulation via electrohydrodynamic atomization spray technology (Electrospray) (Chapter 22). "Handbook of encapsulation and controlled release" CRC Press, Boca Raton, Florida, 2015.
H. Honors: - Winner of "The 12th Razi Research Festival on Medical Sciences" (December 2006) - First place winner of "The 3th national symposume of young elites" (2009) - Selected as The Excelent lecture presentation in “ The 4th International Seminar on Polymer Science and Technology" (ISPST 2005) - Selected as the Best Book (work worthy of recognition) in “The Oil Industry Book Festival “ (2013) I. M.Sc. & Ph.D. Students: Ahmad Abarghooei, Atefeh Afroozan, Peyman Akbari, Fahimeh Alipoor, Zahra Ashraf, , Shaghayegh Baghapour, Hamideh Babaloo, Fahimeh Bani Hashemi, Farnaz Bayervand, Hoda Beheshti, Rahim Dehghan, Rashheh Eshraghi, Majid Esmaeili, Rahim Faramarzi, Azadeh Ghaee,Mohammad Hosein Ghanian, Hoda Gholizadeh, Fatemeh Haghdoost, Ali Haghighat, Mahsa Hakkani, Yasaman Hamedani, Somayeh Hashemi Nasab, Adeleh Hashemi Panah, Anahita Homavand, Pooya Jafari, Milad Jafari Nadooshan, Mina Jafari Nasab, Majid Kamali, Saeed Karimi, Mohammad Kazemi Ashtiani, Kiana Khadem, Mahdi Khalifeh loo, Sakineh Khezli, Shahla Mahdavi, Sara Maleki, Marzieh Moghiseh, Mahshad Mohseni Moghadam, Mahdieh Mortazavi, Susan Mokhtari, Ali Mota, Mitra Naeimi Seresht, Ahad Rabbani Doost, Arash Ranjbarzadeh, Mahdi Saeed, Sara Salehi Shahrabi, Mahdieh Safarpour, Maryam Shojaeepour, Adel Soroush, Saeed Taghavi, Mahsa Talebi, Ali Taslimi, Pania Terraf, Shabnam Tohidi, Mohammad Vahedi, Melika Zakeri, Reza Zamani, |
طراحی وب سایت آریایک توسط aryanic highportal aryanic